Search results for query: *

I checked and I found 3 nationwide and all 3 are the one I have so no luck

Thanks I will give it a shot

If I can find the pic I posted first, I will home the hole out to fit my shaft if it’s too small and try to make it work The 1st pic looks like it tightens down with a set screw but I’m not sure

I have searched all over the internet as well as slantsix.org with no luck. Thanks for your help guys maybe someone else will chime in here soon

My pumps different and it don’t think it sticks out enough to line up with my harmonic balancer. Does that one bolt on or press on?

Here is my pump and pulley. It’s a press on

Let me go look to know for sure

Could you take a pic of the pulley so I can see what it looks like. I’m willing to give anything a try at this point. I have a Saginaw pump I believe. I always get the names and style confused

Well the pump came off of a 85 dodge D150 and I put it on my 82 dodge D150. I have hit up all my forums for Mopar parts. I just need that pulley pictured. But the pic is from my buddies 73 Scamp

hey guys I’m looking for a power steering pulley for my Slant Six. I recently added power steering and the pulley is set back too far and I need this kind of pulley in order to run power steering. Please let me know what you have lying around. I also have this pulleyin the 2nd pic to trade if...

No I'm not. I wish I was

like the ad says I'm needing a slant 6 power steering brackets or setup. It's gonna be going on my 82 D150. I was thinking that small block power steering brackets would work but I was informed otherwise. Let me know what you guys have Thanks

Its a tapered shaft and have to use a puller. I made one I can send you to use? This is just a pic I found on here I used to make mine

Anyone interested in this battery tray? Make an offer

$75 + shipping Any takers?

I have the center section for the steering wheel just not pictured. Anyone interested? Trying to buy parts for my new B body Thanks

Front and rear window clips are SOLD

70-up power steering column for A body. Auto on the column but can be modified for auto on the floor or 4 speed. The column is gold, the steering wheel is not included I just used the wheel to store the column upright. $100 plus shipping located in Herrin, IL I know the bracket that mounts to...

Pm's replied

I got rid of my Scamp and I have extra A body parts that I dont need battery tray $25 plus shipping Front and rear windshield molding clips $40 plus shipping Extra Duster/Scamp grill parts FREE if you buy the windshield clips

The car is a attention getter, it has dents and dings here and there. Its a really solid car, have the fender tag and 2 build sheets for the car. Let me know what you might have to trade

Im looking to trade my 72 Scamp with a 360 4 speed. New interior, carpet, dash cap, pistol grip shifter. I have a new headliner in the box that still needs to be dyed either green or black and installed. It has 17" Mustang Bullitt rims, I also have a full set of 14" rally rims. I molded a...

My car is a 72 with a late 70's 360 out of a motorhome

Thanks guys, I sanded real good under where the screws go and I got a new ballast resistor today and when I left the parts store battery was dead! Luckily I had a jumper pack in the trunk because it had been slowly taking a little longer to start and seemed like the battery was getting weak...

I have researched and found them on Ebay for around $80 But if he sells them I will buy from him

After the winter I got my car out to get it cleaned up to enjoy the summer cruises and I have had a hell of of a time getting it to run like it did. It has a 360 in it and around 2000rpm it would start to cut out and wouldnt rev any higher. I have tested my ignition module because I tested it...

Who is going to Street Machine Nationals in Duquion, IL this weekend? June 26-28th I will be there but Im not sure Im gonna enter my Scamp. Its $60 to register my car and Im probably only gonna be there Saturday. Im possibly gonna cruise around Duquion friday evening Friday 9am- 7pm Saturday...

Sold

Anyone interested?

I have 600 CFM Edelbrock 1406 4BBL carb for sale. Nothing is wrong with it, I just prefer Holley carbs. Its 1 year old $125 + shipping Located in Southern Illinois