Search results for query: Edelbrock Intake

I think, I know it's poor QC. Some of it is just the process. Most of the mopar parts are sand-cast versus permanent mold. Sand casting can produce good parts, but worn or neglected tooling results in more tolerances and of the processes they run, sand is probably the most variable. As a result...

It's also not hard to see a big drop in quality with Edelbrock products in the last few years. We've all seen mismatched intake ports and problems with some cylinder heads. SOMETHING is going on and making products overseas would explain it. What do you think it is?

Up for sale is a victor intake that came off of my 440, only been bolted on the engine. $350+shipping Have a complete Edelbrock pro flo 4 for RB kit, #35910. Used just a short time(250 miles). Absolutely nothing wrong with it, was pulled off cause of hood clearance as we are going back to stock...

This is what I used on my Edelbrock Airgap with no issues. No china wall gaskets. Get a good phenolic spacer for under the carb, Edelbrock has these also. Check out the Holley web site for parts. https://www.edelbrock.com/intake-manifold-gasket-for-for-1966-87-318-340-360-chrysler-engines-7276.html

Believe it or not the Edelbrock carbs are more prone to heat soak because of where the bowls are.

I’m running electric brakes, but clearly I was not on them at speed. Fuel pump is mechanical. Really not much else- MSD, radio, that’s about it. Everything else I can think of is mechanical. I ordered some coolant specifically made for high performance engines that has a 70/30 glycol:water...

Can't help but think the Holley what you call them > double pumpers... 2 outter fuel bowls soaking up the heat from a hot intake and engine. The difference between Holley and Edelbrock is Edelbrock has the 2 fuel bowls protected under the removable top bonnet plate. less heat transfer to the...

Offenhauser never made a dual Pane intake manifold. Their low-profile manifolds are a split plenum single plane. Not the single plane design like a Victor or Torker either. 50s tech. They made a "Dual Port" which does not accomplish the claims Offy made. Offys Tunnel Rams and Port O sonic single...

On SMCARNUT’s intake, that particular boss isn’t there. It’s s a good idea though. The sensor just has to go into the cylinder head to clear.

Back in the seventies, I ran a Torker 340 intake. It had no provision for a mechanical temperature gauge. I just drilled and tapped a hole in the intake's water jacket, between the thermostat and the driver's side head - basically where the factory location was, and where Edelbrock puts the...

The big thing when making that crossmember is driveline angle. Get yourself 2 spirit levels, and an angle finder. Since you will likely have to make the crossmember with the new transmission in place as a jig of sorts, you will need to do a few things. Firstly the car needs to be dead level...

Save the W2 for a race application. The Edelbrock well ported will make the power. It will not even require a big cam. IMO, you’re on the right track. I’d use less compression (11-1 or s still more than enough.) and have the heads and Victor ported. A 1-3/4 header into a 2-1/2 exhaust with a...

Thanks for the information. VERY useful.

Unless you just want to have the W2's to say you have them, I'd re-use the Edelbrock heads and have them worked over and maybe taken out to a 2.05 or 2.08 valve. The W2 have more potential but they need to be ported as well to take advantage of it. The bespoke rockers/intake/header flange all...

OK , I'm sure this topic has been done to death but I really need a direction to go in. I'm building a 408 stroker from a .030 over 360. looking at 11:5 - 1 compression , pretty good size hydraulic roller cam. I'm looking for 500-550 hp if possible, It's going in a 3200 lbs 67 dart with a 4...

Wow, I have not sent an update since May of 2020! Let's see, where do I start? I hit a deer a couple years ago and that resulted in a new hood, DS fender, grille and lots of paint touch ups. I had a great experience dealing with Hagerty insurance on this claim and the car is in way better shape...

Lol yeah

It’ll bolt on…. With the use of a drill and tap on the head…. Port alignment is another issue. There isn’t enough aluminum to port match it to the stock window on the head. Maxing out the intake window area is the best that can be done at that area. It will help a lot.

Am I missing something? He says he's building a 408 stroker using Edelbrock magnum heads. That intake won't even bolt on?!?

Originally a /6-3 on the tree. Now is a 318/904. Unknown mileage on motor/trans. Runs good, has new hooker headers, edelbrock intake and Holley carb. 73 K member with BBP disc brakes 8.8 exploder rear, 3.73 LS, disc brakes. Drivers rear pan has been replaced, passenger side needs...

I worked on quite a few things on the Barracuda. This was one of my favorites - only one of the three bulbs in the gauge cluster was working, which meant you couldn't really read any of the gauges. I took the cluster out, cleaned everything and changed the (LED) bulbs, but that only fixed the...

Here a 340 torque stock on the left fully modded with an xe268h cam on the right, it's not showing under 3000 rpm but it's unlikely the xe268h is making less stock to at least 2500 possible 2000 rpm. So your driving around at say 2000 rpm you hit the throttle, at 3000 rpm all these mods make...

Edelbrock 2735 Torker 340 intake manifold. Intake has been cleaned and painted with high temp engine enamel, and all the threads have been chased. Intake is unported. $240 plus shipping from Oregon City, OR 97045.

PM sent

Dan, doing research is good. For intake manifolds, generally the factory 4 barrel intake, the Edelbrock Performer or an equivalent dual plane competitor work well on the street. I would spend time finding a car and planning the long block assembly. You need to research piston manufacturers to...

For sale small block Edelbrock LD340 intake manifold. Center divider has been milled down but not to intake floor. Ports are untouched. Came in a vehicle I purchased. Polishing was started. Located in 93013 CA. $275.00 obo plus shipping. Thanks

Hey there, new to to the forum and to Mopars but not to cars in general. Have a ton of questions, hopefully I can find most of the answers with the search feature but I'm pretty excited to start wrenching on my new car. Recently bought my 72 Duster 340. The Vin hints it was originally a 318...

The Edelbrock is shorter than the weiand. I think pretty close to the stock manifold and much lighter.

Mine was doing smilar, until I got a composite carb spacer. I have an Edelbrock AVS2, RPM intake with Iron X-heads. When I would stop to get gas, it wouldn't start, or start, then shut off. It was percolating. The spacer cured it.

good comprehensive info! one of these 2 alum intakes are required: weiand "stealth" or edelbrock "performer". they used to allow iron intakes but I spoke with IMCA yesterday & he said he would call my track & OK an iron intake for me. OK so I have the stealth manifold & it is so tall that the...