Search results for query: Edelbrock Intake

Will be curious to see if it fits with your hood. I thought( at one point) the super Victor is no taller than an Edelbrock air gap, which I had on my old 360 at one point and it fit fine, but I think I talked myself out of believing it..lol Be cool if some had both and could measure. I know what...

There were a lot of Mopars which is awesome to see. You should. Any drag n drive really. They are all so much fun! The 67 Mustang has a 400” windsor with a 300 plate system. They are new to the nitrous but it went well every day for them. Rick dropped a valve after a defective (brand new)...

I used to run the mopar performance 280 cam. It is a .474 lift with 110° lobe separation. I ran it dot to dot in a warm 360 in my dart sport with 3.55's and it scooted well. Also for intake I had the Edelbrock airgap. Fast-forward to 2022 I decided I wanted to try the 292 mopar cam with 108°...

awesome , what are the cam specs? Stick car?

My daughter's 340 stock stroke, with Edelbrock heads not ported, Bullet cam, pump gas 10.7-1 KB pistons that are 15 years old, lightweight i beam rod, M1 intake, with 4.56 gears. runs 10.60s in the quarter mile. got to be 485 hp +or-, and its just a street car that is not driven on the street...

I want to say I have heard that the cast iron R/T's were better than the old EQ's which were better than OEM. So that is how I would rank them. For a stroker build, I would guess even an R/T head would limit them without some work unless the cam was pretty mild. For a stock stoke build, I...

...engine is 11 2 64, cast at 11 during the day shift. Due to the hollidays I guess this is as close as a «matching number» I can get. However, with a new shifter console, new alternator and Edelbrock intake and carb, I guess he would never be considered as a collectors item for any other than me.

I told you earlier if you get your Edelbrock heads and Victor340 intake ported you can easily make 550 with a stroker. That is if you get the right guy doing the porting work. Don’t mess around with a 2.02 valve. Jump up to a 2.055 intake valve. Years ago my stock W2 heads flowed 260cfm&.450...

Currently installing Mopar Performance Purple Shaft P4452757AE in my 273. Lift Intake: 0.410 Exhaust: 0.425 Adv Dur: 248/256 Dur @ 0.050: 211/218 Edelbrock RPM Perf Heads I am having difficulty finding the correct valve springs. Any recommendations? Thx, 65

Your Edelbrock heads and Victor340 intake will work fine getting you to 500-600 plus horsepower. Both of course will need ported and I recommend a 2.055 valve and a 5 angle valve job. Then I recommend a .625-.650 lift cam to take advantage of your porting gains. I’ve proven both a solid lift or...

If you are building a stroker a lot of folks (including me) used a roller cam. Which in today’s world opens up a lot more options. And roller cams will make more power with more drivability. The bonus of using an early magnum block is it will accept the LA style edelbrocks or other similar heads...

Same heads and intake, appropriate cam for intended use, yeah, it'll rev just like your 340, with more power. (My opinion only).

So if I go 408 from a 360 , would my top end work if the right cam was selected? (edelbrock heads and Victor intake) I would port them as well.

edelbrock 340, or any small block, excellent condition, dont need CHEAP $120 plus shipping every intake at summit 3 to 4 hundred

...with the most torque for a street car was a 465 lift 302 duration. It was an oval track cam. The engine had 10.5 compression a stock 70 340, 915 J 202 heads. LD 340 intake 750 4 corner holley style carb. A bone stock 340 with bigger cam and an Edelbrock intake. Stock 3200 converter and...

What did you use for a head flow number? To the OP, I would not put a hydraulic roller in it. Solid, the maintenance is so overstated, check it once a year and you’re done. It’s like a physical for your engine. You choose a roller so you can snap the valve open to a useable lift quicker, but...

Streetable 340 making 450 hp… meh… I suppose I will post my combo in my 340 Duster. 10.5:1 flat top pistons 284/484 purple cam (241 duration at .050) hydraulic flat tappet. Rebuilt X cylinder heads 1.5 Harland sharp rockers LD340 intake Edelbrock 750 3200 stall FTI converter 727 transmission...

The 340 in my Duster was built with the intent of it being between 430-450hp. I haven't had it on the dyno, just a street street car that I daily drive most of the year. Based on power/weight in other stuff I've driven and somewhat similar builds I've seen dyno'd I would wager it's probably more...

A recently met friend bought a set of 2.02 valve Speedmaster heads from me. His girlfriend is racing for the first time this year and averaged 12.50’s for the week. They will be installing the Speedmaster heads this winter and I will be gasket matching their Edelbrock dual plane intake. She said...

Yup, that’s why I think I will be able to get there with this combo. Definitely am thinking about getting bigger cam than what I initially suggested, I think 750 Holley (whether that be a DP or street demon) carb with a couple of adjustments should be able to handle whatever cam I plan to throw...

The 380hp crate engine makes 400 hp with similar cam and stock magnum heads, don't sound like 450 hp with Trick Flow is that much of s stretch. What's the cr gonna be ? Here's a 450 hp stock short block 5.9l with edelbrock heads and similar cam...

Hey all, I’m starting my 340 build and I’m looking to get around 450 hp or possibly even more out of my stock stroke 340. This is mainly a street build so drivability is a must. Stock bottom end 72 340 (Keith black pistons), trick flow heads (Specs for them), 1.6 harland sharp roller rockers...

My friends car just ran 6.40 in not the best weather at Norwalk and that would be a 10.0’s in the 1/4. 60 foot times aren’t where they should be yet, only shifting at 6400 rpm with his 408 with ported Edelbrock heads and ported super Victor at 3200 pounds. There’s 3-4 things I Dont like about...

I bought a truck with this motor in it. Pulled it out around '03, stole the rebuilt 587 heads for another car, then ended up putting some well-used 915s on it. Stuck it in my '65 around 2010, without ever looking at the short block. I wanted to know what i was dealing with, and I have too much...

For as rare as those seem to be and the money they are commanding, especially as one that looks as good as yours does, it would be wise to go another route. I have a 70-71 that needs restoration, it looks fairly well used. I was told it was worth $350 USD minimum.

Agreed, I do what I need to or want to on my cars. Hack it up to make it work if you need to. I did on my air cleaner base on my Roached Runner to clear the taller Edelbrock intake and 2 stage nitrous plate.

this is a Duster with edelbrock rpm intake with their 800 avs2 & 1/2" heat sink. Don't think I want to mess with the original & live with the one that fits. Don't want to lose the spacer. Now I have a nice air cleaner on the shelf to look at. Thanks folks -Mike

The old LD4B's and LD340's as well.

Yup its usually a spacer or the intake is too high issue. Fun snippet of info the Edelbrock Torker while it is not popular for some was a low rise single plane that was designed to fit under a street car hood...:)

I know everybody talks about flow bench numbers, but does anyone CC the intake port to see the size?, i would like to port a set to 200cc plus, has anybody done that? Thanks