Search results for query: *

Guys, ref 360, thrust bearing cap to block alignment. I have ARP mains studs, without bearings fitted I noticed the surfaces front and rear of the #3 bearing cap to block have a slight miss alignment/step front to back, installed the bearing and others in the block and dropped the crank in...

Gents, Im going to be running a FAST SFI TBI injection set up on my 408. The 408 will be at around 11.5CR, has anyone used or have thoughts on this Water/Meth system?? http://www.snowperformance.net/product-p/220-mc.htm Greg

Anyone out there have the diameter of the burnishing tip of the installation tool please? I'm Australia and its cheaper and easier to make one right now with the exchange rate at the moment

Gents, and laides if we have some. Im putting togeather a stout streeter in a 73 Cuda and I'm down to selecting a solid roller cam and lifters, it will mostly be street driven with a few blasts down the strip, looking to get late 500 to early 600 HP (flywheel) with a 727 trans and 3.55 gears...