Search results for query: *

All of the brake line places have them.

I didn't realize that the aftermarket had the seals with the dust seal. I've seen so many rebuilt transmissions that just have a single lip seal.

You just say the word and we will get together a FABO caravan road trip! Lawyers, guns, or money!

lol yeah, I’m not politically correct.

Yup, I understand. It’s the cumulative effect of all those shifts. I forget, are you using a 3 paddle or a 6 paddle disc? If it’s 3 you can order a 6 and that will calm it down a bit. Also you can drop the plate load way down. I forgot where I started getting into issues but I think I could...

NEW 1964-65 Barracuda/Valiant Back Up Light Lenses | eBay

The first thing I would do would be have the car put on a frame rack to insure it didn't get bent. The roof is structural to the subframes. It may have tweaked something, it may not. I'd rather know, personally. My '74 Challenger looked very straight when I got it, but I had it racked...

There were 4 or 5 Ld4b at the last swap in Indy. One was a guy that is there every year for $150.00. I bought the nicest one out of the bunch that another member here turned me on to for 250.00. The one for 150.00 was very clean. It just needed a little resurfacing where the thermostat housing...

Radiator core is visible, no sticker. Grille is 71, not uncommon to have been changed. Not sure if the door panels were used with the low line bench patterned seats. Dash looks correct. Definitely has been partially disassembled for paint, no blackout on rad support. Painted over wiper motor...

Hi folks. This is a pretty straight forward question with related back ground. I recently decided to do the front disc brake upgrade on my 67 Cuda. I received the brake kit with the purchase of the car. Unknown supplier, but the calipers have Penstar castings on them. Most likely aftermarket...

It's just kinda how my brain works. I keep a running list of reminders and I guess you'd call check points. Feels really good when I start marking things off and it keeps me on track, depending on where I wanna be. When I'm in the shop, I write things on a plastic divider I have that splits off...

don't call his cam retarded! It's doing the best it can :(

Only parts I've heard good was his tuning fi systems. But if I wasn't in Tx. and him in Del. this wouldn't have turned out this way. And I bought the parts through him cause he was doin my heads. In his defenseI can't find anything wrong with them but I haven't used them either.

The TQ jets are NOT interchangeable with the other carbs. The TO secondaries are about an inch long. As I recall the TQs are 1/4 not 5/16. Holley jets are 1/4 put are a different thread than the TQs and taller as well. You could force then into the Phenolic as it damages the threads. They...

HOLY SMOKES!! How does a toilet get that dirty?? ....don't answer that question I'd attack that in a gross decon fashion first -- diluted muriatic acid and a stiff brush. Flush, repeat. Flush, repeat. Don't forget gloves, eye, and respiratory protection! Get it as clean as you can with that...

4 spd , wrong air breather, no heater blower motor, wrong shifter handle, not sure about the master cylinder, just a couple of things I noticed from the pics.

Sorry for that Tim. Hang tough

It's a 4 spd listed for $34,000 I believe. Looks to be orange

Sorry Tim seems like you had more than your fair share of crap.

OK , I get it , my clutch is "junk" , but it was fine for 22 years previously of power shifting , racing etc. The only other factor was I had 2 heavy passengers when I smoked 3rd gear. 500 lbs extra will do that. . I'll be fine , if not , then I'll deal with it. The car made MANY passes down the...

I recently had a tree fall on my Valiant and it caved in the upper part of the window frame. I have a donor roof. Am I better off to porta power the roof back up, as a member here suggested, or re skin it? I am NOT a body man, and I figured the non body person way was to reskin it, as I...

LOL......They are all red! :)

Well good morning. I'm in a big funk. Family crap. But I'm still moving forward...***** SIL...

Thats what I wanted to hear I'm gonna use my old guides as templates to make some do you have pics

Interesting, which ones work? I have tried everything under the sun and stopped doing it about 5 years ago because nothing made a difference.

The red one?

Morning, @fatoldguy in our thoughts. cold here this morning, waiting for 2 loads of ground concrete to be delivered here. Muddy mess with all the snow melting.

Just so you know, when I learned how to not break a gear box it was from Joe Liberty. I did exactly what you are doing. I was looking for the 9310 gear set. A few minutes into the conversation he asked what the issues were. I told him I can't keep third gear in one piece. He asked about the...

Post a picture

I have for sale a pair of M/T valve covers for any of the SB LA engines, P/N 103R-63B. They just need some new paint then file the paint off of the fins and flat area. They would then be awesome. No cracks or any other issues that I can see. Included is a chrome breather with the Mopar logo on...