Search results for query: timing chain

Hi, after I had re-installed my timing cover, I started wondering how the timing chain gets lubrication? There's a shiny new plug installed just above the cam sprocket by the machine shop, is that supposed to be there? THanks! dne'

Has anyone added a timing chain tensioner when rebuilding a small block (273)? If so, I'm looking for information on what tensioner you used. My chain has a horrible amount of slack, so will likely need replaced. I've heard the tensioner is a great little upgrade to the timing chain and is...

To ID what I have. how many teeth does a SB or BB timing chain gears have? thank you for your time. RR

mopar R3 short deck timing chain cover $350 shipping should be no more than $20 in a flat rate box will show actual shipping receipt

Timing chain cover, small block, part # 2951698 $60. Water pumps, small block, part # 2863067, and two 2402794. All spin freely $50 each. Shipping is extra. Thanks FABO.

I'm rebuilding my 225 and when I pulled the timing chain cover I noticed just over a half inch of play in the chain (slop). Is that acceptable? Thanks

Hi everybody I'm new here so please bear with me. My 69 Dart 340 has a tiny pond on top of my timing chain cover. It looks as though somebody tried to tack a leak with a welding rod and didn't do a very good job so I wipe up the leak and paint comes along with it. I'm not concerned with the...

Slant Six Timing Chain Oiling - Colonial Region Plymouth Owners Club You can drill for more oil: Timing chain oiling - Slant Six Forum

No mention of timing chain replacement in the rebuild.

I was doing some reading a little bit ago on the 318's and it suggested that a "true " double roller timing chain be used. I have to admit that I'm confused here as I've always thought that the double roller timing chain were "true " double rollers. Also it said to use a cam as close to the 340...

Cloyes timing chain keyways incorrect

Lots of threads on it. Question: What is the Best timing chain setup LA or Magnum Timing Chain

Timing Chain Set is SOLD TRW Pistons are SOLD

Interested in the timing chain. Your inbox is full.

Uh oh.

...of a coolant leak between the timing cover and the block, otherwise I wouldn't be here. I was curious about the condition of the timing chain. This engine was bought from a Chrysler dealer, it came from an authorized rebuilder in Toronto (Ontario Reman) circa 1986 and I might have 10k miles...

Might be the timing chain causing that bounce

...the block incl: thrust plate + retaining bolts (incl the oil drip bolt); cam bolt, washer + fuel pump eccentric; oil slinger; and '70s timing chain cover. Would be awesome if someone had everything on the list rather than doing it piecemeal but beggars can't be choosers. Looking for good...

I have an LA318 that has a tried timing chain in need of replacing. So now I'm looking for the best setup. I like the idea of the magnum setup with the chain guide, but I also like the like the idea of the double roller setup. But I don't know? What's the best setup?

:popcorn: timing chain tensioner works great, any problems are from defective assembly and poor choice of timing chain. Loose chains cause late & erratic timing. If the engine guy says it's not needed it's time for a new guy

Timing chain can also be the culprit if not installed properly or if bolt has loosened from cam.

Is it possible for these engines to jump timing? Had an older escort that acted like this and it had jumped timing. Of course the escort used a belt where this has a chain.

Timing chain good? How long have you owned the car.

So I'm installing my new timing chain and gears and the cam sprocket is loose and has play against the cam key so I thought maybe the key was too small I took off my old timing chain gear and it fits snug on the cam and key well as a tiny tiny bit of play but nothing like the new one? Should I...

Replace it! Timing chain is crucial for performance and mileage! I run that roller master double roller slant six chain it is expensive but tight as ****. Rollmaster Timing Set CS5300; Red Series Double Roller for Chrysler 225 Slant 6

...replacement And the oil pan gasket While looking at the very clean I sides of the crank case I noticed what to me looks like a slack timing chain. The bottom of the oil pan was clean, no sludge or other deposits, or chunks of mystery materials. I filtered the oil I removed through a paint...

That's how I tested and diagnosed a stretched timing chain. It did not fix my timing issue though.

i have a new zoom timing chain set #160001 whats it fit ? thanks

Just putting this here in case someone wants to do this :usflag: https://www.forabodiesonly.com/mopar/threads/slant-6-timing-chain-lubrication.571545/

If it starts and runs good for 20-30 seconds, I doubt it's the timing chain