Search results for query: *

Not often Canadian cars came without heat And that certainly doesn't look like a factory cardboard? delete plate. More likely removed to run those lines

Start a Parts Wanted thread if you need originals.

I barely used this thing, it does work. Used for setting my points. Then I swapped to HEI and never used this again. The box is very old and fragile. The Tach is nice. Still has Kmart price tag on it. I think this thing might be 40 years old. $20 shipped.

This is the OER Chrysler Red from Classic Industries. I went through this in 2018 and tried 20 different versions of Chrysler Red, International Harvester Red and Industrial Red and all 20 were different. At that time I was able to get a couple cans of Mopar Red. Alan

Hot off the presses. Advanced Auto to close 700 locations.

I appreciate your time and I want to use these but I am installing the motor now a n d can do it after it is in the truck

I'm so happy with that answer, just happy I don't have to take it apart! ;) :thankyou: :thankyou:

Disagree. That was FUNNY!

No I have valve covers that I can take off the tops and work on it I just was saying that the valve stem height is correct with oem specs

In a nutshell, there are only two styles of slant six rockers. The ones for solid lifters (has the adjuster screw) and ones for hydraulic lifters (no adjuster screws). Over the years, there may have been subtle upgrades or changes made, but nothing substantial. Basically, all slant six...

Chris, so I had been thinking about your statement. Because it is on a different forum, yous guys don't know. A kiwi friend who has decades of streamliner racing at Bonneville has issues remembering names. So, do to my long beard (and red) he just called me ZZ. Then introduced me as such to...

LOL! Man I dunno I like to toss up casual reminders every once in a while...does anyone remember him beating the cam in with a dead blow hammer in that Hemi that the GTX owner had at his shop? :)

Yes, First digit 1-9 = Jan-Sep A/B/C = Oct-Dec Last two digits are the date. I should add or we'll be corrected, this is the "Scheduled Build Date", not necessarily the actual build date. If that is the casting date then it is the date the block was cast, hard to say when it was machined. The...

I allready tried in another thread to help, waste of time

Control arm adjuster bolts. Set of four $20 plus shipping PayPal only Located Ontario canada

67 Slimer, May I ask what times your car turns, and what the 60 ft. are? What's been done to the engine and chase? A video of your car leaving the line would be nice too.

I know it's a little off topic of the brand, but I Love my Maxjax lifts, I have two. When not in use, I unbolt and roll out of the way. I have 3 places I can bolt them. They're great for low ceilings, but I like that I can store them when not in use. Plus I need the lift put vehicles on my...

The left side stripe is 4 years old. I just painted the right side 3 months ago. Yeah, I'm lazy.

DIsc brake spindles used on 1973-74 Barracuda's and Challenger's, (E body cars) and 1973-76 Dart's, Valiant's, Duster's, Demon's. (A body cars) Great to use to swap to big bolt pattern. $200.00 obo plus shipping PayPal only. Located Ontario canada

More pictures

Barracuda door panels All decent condition not perfect 67 Barracuda white drivers door panel, $50 69 Barracuda passenger side door panel, $50 69 Barracuda fastback white rear panels $50 set 68 barracuda fastback rear #1 $50 set 68. Barracuda fastback rear#2 $50 set 68 Barracuda, Notchback rear...

I'll have to measure them but i bolted the oem on and they are working and have preload

That I cannot answer. I doubt that was a car that originally had no defrost/defog from the factory. But who knows.....Take a chance at 34K? I guess he could put one in if the MTO requires it.

You get it started?

Omg. I had no idea...

TF- B.Force FC-A.Prock PS-A.Stanfield PSM-G.Herrera Good luck everyone! See ya at Pomona!

PM sent.

I think that idiot has moved on to drag racing a **** box jeep cherrokee

Yeah, I was wondering about that nut i have on there, at least it's easy to get to if it's not correct. As for the conical washer~ the engineers back then came up with the darndest ideas! lol