Search results for query: *

Good Morning, I have been doing some reading on the QA1 crossmember and had a couple questions. Working on a ‘67 Barracuda, factory 273 crossmember with a ‘72 360. First question will my existing motor mounts work? I ordered them from Mancini several years ago telling them I had a ‘67 273...

Looking for advice for a set of front and rear sway bars for a 67 Notchback Barracuda. After reading many posts I believe I am interested in 1 1/8 front and 1 inch for the rear. There’s more than a few options and I have never bought or installed sway bars. As a drag racer I always removed...

I just recieved my flaming river coupler FR1506M...for manual colume to manual steering box My question is, the instructions say cut 1 1/2 inches off the end of the steering colume shaft. I thought I read on here "A thread on this forum" that an 1 1/2 is to much and only cut 3/4 of in inch...

So I have done a few searches on google and on this site..but I haven't found any real information. I have a manual column and manual steering box in a '67 cuda. I am looking a steering coupler thats not $160+ plus dollars like the flaming river unit. I cannot find any actual specs on...

So I'm ready to weld the new perches onto the 8 3/4. The rearend is under the car and bolted in but the perches are not welded to the housing. The car is on all four tires and sitting at ride height. Also, I don't have a driveline. All of the searches show a measurement off the driveline...

I know this has been discussed a bunch because I did a search. However, there still seems to be some confusion at least on my part on how to install them correctly. In my case the car is on jack stands, the front-end is completely new and this is my first time... In a step by step this...

I have a dumb question... I am getting ready to put my 8 3/4 rearend into my 67 barracuda and I do need to weld on a set of spring purches. I went to a local swap meet and bought a new set of a-body rear offset spring hangers. The seller told me I don't need to offset the front of the...

Hi, I need a couple numbers of places I can call to order Parts for my 67 barracuda. For example, front-end parts, parts specific to that car. Right now I am converting from small bolt pattern to large...Who can I call for new bushings and ball joints that would know what I am talking about...

I'm sure this has been covered many times but I just want to be sure I'm doing the right thing. I have an 67 notchback barracuda with the five on four front-end. I just purchased what I believe to be the front suspension off a 73 scamp" Upper/lower control arms, spindles, all the disc brake...