Search results for query: *

Has anybody done this with stock suspension and steering.

I've seen some folks selling some air cleaner bases over the years that look stock but yet have the big throat for newer four barrels....where can person find these? Thanks for your time.

Will remflex gaskets alone make where the manifolds clear. I know from experience that remflex gaskets are thicker. It made my header clearance in my 64 Valiant a little tighter. Thanks in advance.

....what's the best fitting carb....my E-brock 600 manual choke doesn't want to open up.....the bores in the intake aren't big enough? I've noticed that some people aren't running an adapter....so what I'm I missing. Does it need the 500 cfm carb to work are the throttle plates the right size...

Does the cross pin unscrew....it doesn't have a bolt like most of them due? Thanks.

....this will make you laugh at my dumb ***. Last September we finally closed on our new place. So I'm driving the ol' Valiant over from the east side of Carthage to the west side of Joplin......as I was leaving the house and I noticed that it was getting harder going in to third gear. As I...

What have you guys done for hood hinges. I've got pictures of a car that a guy had built for someone else. I've posted a bunch of times to see who built that car on this site and other sites and can't seem to find the person or the owner of the car. I need to get something done with mine for...

Who has the best one, and price? Thanks guys.

Well............I tried putting the Dynomax VT's on it. They were too big and I wouldn't of gotten it off the rack. So........back home I went and put the little one chambered Flowmasters on it. I know I'm sure I'm going to hate them. Here is a video at 7:30 this morning...

Trying to raise the front end some. It was at 24 3/4 in. upper wheel well to the ground and now it's around 26 in.

.....for the headlight rings. They are real nice. I think they are little expensive, but..........Anyways thanks again.

.....I'm working on the brakes again to finish it up this time hopefully. Found that the master was leaking out the back, and that the 74ish prop valve wasn't what I was needing for 4 wheel disk set up. Doctor Diff(Cass) set up with the right prop valve and a master. I'll take a shot of the...

The defroster one is easy of course, but the other two which way do they go? Does anybody know of documentation of where they go on the heater box. Thanks.

What do you guys think of this. I'm not sure I've seen a speedo like this one. Also noticed that the temp gauge and the amp gauge are different. Well different that what I've seen and have.

everybody and have a Happy New Year!

Man am I up against a fight for sure here! I will be trying to post some pictures of this deal. I got the bell from Mancini Racing on sell and going to try and use Brewer's 10.5 conversion stuff. I got the Centerforce Dual Friction set up with McLeod SFI 130 tooth flywheel too from Brewer's...

Does anybody have part numbers for the early 60's. I've got with # inked stamped #2453657on one of the blades, also the old DPCD in the center of the fan . I think the 5 & 3 #'s are hard to make out. Just curious if anybody has a numbers book to tell what it make from? Thanks.

I really thought by now that they would be making these for our early A's. I guess not? Well, mines being a pain in the butt. The passenger side works, but the rear driverside doesn't and both brake lights don't work now. Wow, what a deal. Started checking wires and went back to the turn...

some one could help me post it. I hadn't started it up in three or four months and decided to start it and try my wife's new flip that I got her for Christmas out. Anyways can some one help me post my video? Thanks.

Which one fits better in our early A's?

I went up to MN for work this year and while we were off site seeing after class I spotted the car. I didn't have a cell phone or a camera be able to take a lot of pictures of the car, but my buddy had his cell phone. I had him take pictures of the factory vacuum gauge in the dash. I haven't...

I found this factory NOS thermostat housing on E-bay.....man........a couple of years ago now. I couldn't remember if I posted pictures of it or not. It worked out for me so that I could run my factory stuff and aftermarket live temperature gauge. Also some of the headers and upper radiator...

Her are some pictures I took last night...........I ought to be shoot for not doing anything to it for the last two years. Having problems with the fuel lines that I made up with Summit braided lines and swivel fittings. When I first done this I really didn't have to much issues...

Will this fit our years? http://www.yearone.com/serverfiles/fbshopmain2.asp?cat=1

Has anybody replaced the gasket on their gas caps? Thanks in advance.

Did some one here post this car on this site? I would like to talk to them about some things. Thanks in advance.

...........just not on my car. Sad to say...........but I'm needing some better transportation. So I've been working on this..............

Is anybody reproducing turn signal switches for the early A's?

I really didn't want to do this, but..........with the roll bar and the my seats being redone it's hard to get in the car. So I got a smaller one.

Where can I get one for my car? Thanks in advance. Lee