Search results for query: *

Thanks for all of the advice everyone! Sounds like I should definitely plan to add some rear gear - I will likely go with 3.91's Thanks! I was using 74cc for my cylinder head volume but after doing some more research it looks like the 308 heads range but are closer to 65cc so that would bump...

I am in the process of building my first engine and could use some help on cam selection. Build specs: 1969 Dart 1989 factory hydraulic roller LA 360 Speed pro 4.03" pistons (H116CP 30) - zero decked Summit CP calculator shows ~ 9.5:1 CR 308 heads with stock valves (1.6 & 1.88) Edelbrock...

Any one know where to get a replacement one of these reverse band anchor links? Are they the same for 727 and 904? I found this one on ebay but not sure if its the right one: NEW Mopar 2204820 Assy RB Link *FREE SHIPPING* | eBay Thanks again- you guys saved me alot of time and frustration!

Thank you! Ok I will pull the trans and go through everything.

Yeah, that thought crossed my mind. Its not very magnetic anymore (doesn't stick to trans pan) however it does react with a strong neodymium magnet so I do know that it is metal and not rubber.

Hi, I been working on my 69' dart a little more. Last time time I spent some time on it I got the engine and transmission in but the car didn't have reverse. The transmission is a $40 904 off of facebook market place and I stupidly didn't check any of the adjustments before installing it (just...

Replacing- it does not need to be perfect, I just don't want something super rusty...

Hello, I need a Transmission Crossmember for my 69' dart (67-69?). Does anyone have one that is in decent condition they would be willing to part with? Please send me a message or post a picture if you have one Thank you!

Does that mean I should be able to run an aftermarket converter like this (without any sort of spacer or adaptor):https://www.jegs.com/i/Hughes-Performance/512/27-25/10002/-1 The description for this particular TC says: "1968 and Newer Mopar A904 (TF6) w/6cyl & 273cid/318cid V8 Engines" but also...

Ok, so is it weird my '67 has 27 splines on the input shaft? I thought the '67s were supposed to have 18 splines from what I have read on here... I have a B&M flex plate so I can run a normal converter. At least that was the plan...

I need some help identifying the transmission I picked up on craigslist. I was told it was a A904 for a small block Mopar, which checks out from the research I've done. I cleaned up the numbers on the side and they read "2801534" (see attached pic). According to this link...