Search results for query: *

This is a good used torque shaft (Z bar) for a 70-74 E body or a 71-74 B body with a BIG BLOCK 4 speed. This is the linkage bar that goes from the frame to the bellhousing. The rod from the clutch pedal attaches to one side and the rod to the clutch fork attaches to the other side. This piece...

This is a good used torque shaft (Z bar) for a 67-76 A body with a small block v8. This is the linkage bar that goes from the side of the body to the bellhousing. The rod from the clutch pedal attaches to one side and the rod to the clutch fork attaches to the other side. This piece has been...

Ok, I'm lowering the price to $100 plus shipping. This is an original Z bar, the special bracket and the spacer from a 67 383 4 speed Barracuda with a 10 1/2 inch bellhousing. ( I took it off myself) I have one of the attaching bolts (standard replacement bolt can be bought at a hardware...

I came across this Hurst shifter handle in a box of A body parts. It might be a repro because there's no part number on it. The chrome is above average for a used part. The ball threads are excellent. It looks like some a body shift handles I've had but I currently don't have one to compare it...

I have some factory flexplates both rusty and cleaned & painted ;$5 each for dirty, $10 for painted. here's what you need to know about flexplates: The six cylinder used a different flexplate and the Hemi had an 8 bolt plate. Some of the 67 and down flexplates had a smaller pilot (center...

I have three of the 10 7/8 clutch forks used on 67-69 big block A body, 66-70 big block B body and 70-72 E body with 10 1/2 inch bellhousings. I have one that's blasted and painted for $20 and two that have not been cleaned for $10 each. Note two are pictured, one is not. located in...

This is a box of miscellaneous 4 speed transmission shifter rods and arms that I have collected over 30 years of working on 60's-70's Mopars. It has been a lifesaver when you want to modify something and not screw up an expensive set of new rods. Now that I'm retiring, I need to accept the fact...

PRICE REDUCED TO $25 This is a used timing chain cover from a 72 318 340 or 360 LA motor. It will fit virtually all LA motors from 66-the mid 80's although the 60's motors used a cast iron water pump and you would want to change that. From 70 up this part was used on everything. What makes THIS...

This is a used original clutch linkage rod that goes from the clutch pedal to the Z-bar on a 67-76 A body. It is 14 1/4 inches long. This part has been wire wheeled and painted with Cast Blast. It is in good condition. Note: Brewer's transmission has a very nice reproduction of this part if...

PRICE REDUCED TO $25 This is a used clutch fork from a 67-69 A body big block. It measures 10 7/8 overall. It also fits some B and E body applications as well. This part was sandblasted, wire wheeled and painted with Cast Blast and clear coat. It has some minor pitting (pictured) but overall it...

I came across a bunch of (6) neutral safety switch/backup light wiring harnesses. They are all three prong transmission plugs with makes them 69 and up. I'm not certain which fits what but they should include A B and E bodies. located in Savannah, GA I'd like to get $10 each plus shipping or...

I came across a pile of transmission dust covers. Some are small block 727 and some are for small block 904 (they are different). I do NOT have the center plug covers for them. Selling for $10 each plus the ride. Can combine shipping if you want more than one. Located in Savannah, GA. Thanks for...

This is a small block Carter high volume mechanical fuel pump that I got in a box of parts. It appears to be good but I don't have any way to test it so I'm selling it as a rebuildable core. It is possible that it works in which case you would get a pretty good deal. Located in Savannah, GA I'd...

PRICE LOWERED TO $25 This is a used 440 Mopar Performance electronic ignition distributor PN 3690432. It has been sitting on the shop shelf for a few years, but it should still work well. The vacuum pod works correctly (advances when you suck on the rubber hose). Located in Savannah, Ga asking...

I was cleaning the garage and I came across these three Hurst 4 speed handles that I did not know I had. The first one (bottom in 1st picture) was marked "67 Cuda" with a magic marker and I got all excited. Unfortunately (unless you are a Chevy guy) when I Googled the part number (6836) it came...

This is a used but clean Hurst 6350 4 speed shifter mounting pad for a 67-76 A body. I do not have the bolts but the threads are all good. Located in Savannah, GA I need to get $25 plus the ride. Thanks for looking!

This is a used transmission crossmember for a 67-72 Dodge Plymouth A body 4 speed or automatic. It has been sandblasted and painted with gloss black. Sorry I do not have the bolts or the rubber mount. The mounts are available at Advance for about $5. Located in Savannah, GA, Looking for $65...

This is a used automatic transmission crossmember for a 66-70 Dodge Plymouth B body. It has been sandblasted and painted with gloss black. It has a small dent in the bottom which does not affect the performance or structural integrity of the part (see pics). Sorry I do not have the bolts or the...

Back in the late 70's and early 80's If you were building a 440 for street and strip the Mopar Performance Electronic distributors (PN 3690432) with the chrome or orange boxes were THE way to go! The advance curve was great and the units performed flawlessly. A lot of these are still floating...

This is a factory A body small block exhaust manifold from a 75-76 318. If you are swapping a 273 or a 318 into a 67-76 A body this piece is a MUST. Many times the a body 318 used the same passenger side manifold as the b and e, but this left side piece was designed to clear the steering column...

This is a used set of small block to big block "Spool Type" conversion mounts for a 73 up A B F M J body. These conversion mounts are designed to adapt a big block engine to a factory small block V8 K frame. I bought these years ago at a swap meet and never used them. I do not know the brand or...

This is a used set of 318 "Spool Type" motor mounts for a 73 up A B F M J body. These are NOT conversion mounts, you must have a factory small block V8 K frame to use them. The driver's side may also work with the narrower 340 360 ears with shims. The ruber insulator on these is the original...

This is a used pair of big block B Body "spool type" motor mounts from a 73-77. These are NOT conversion mounts! You have to have a factory big block B body K frame (different from small block) or an A body K frame that has been modified for big block. I got these mounts in a box of parts...

I have a set of the correct numbers 68-69 Charger, Coronet, road runner big block factory exhaust manifolds. They are not show quality but they would work on a street driver. The heat riser has been disconnected and removed. The manifolds had some rust pitting before they were sandblasted...

This is a used factory set of motor mount brackets and the nuts & bolts to install a 383 or 440 in a 66-72 B body or a 70-74 E body that came with a small block. These are NOT conversion mounts! The 66-72 B body and the 70-74 E body used the same k frame for a small block or a big block. Only...

I have a set of mid 60's steel valve covers probably from a 273. They have been sandblasted and painted. There is some minor rust pitting and a few small dents and dings. Located in Savannah, GA, I'd like to get $25 plus the ride. Thanks for looking.

I have a used big block "187" oil pan. This is the recommended piece to use in A body big block swaps. It has been cleaned and painted with Cast Blast. Pan has some minor rust pitting and a few small dings & dents. Plug is included and threads are good. Located in Savannah GA, I'd like to get...

I'm leaving tomorrow for the Mopar Nationals and I'm trying to get a little bit more cash to get me there. This part will be offered for $100 shipped today only. You have to be able to pay with Paypal. I can ship tomorrow or deliver it to the show this weekend if paid in advance. This is the...

I'm leaving tomorrow for the Mopar Nationals and I'm trying to get a little bit more cash to get me there. This part will be offered for $25 plus the ride for today only. You have to be able to pay with Paypal. I can ship tomorrow or deliver it to the show this weekend if paid in advance. This...

I'm leaving tomorrow for the Mopar Nationals and I'm trying to get a little bit more cash to get me there. This part will be offered for $25 plus the ride for today only. You have to be able to pay with Paypal. I can ship tomorrow or deliver it to the show this weekend if paid in advance. This...