Search results for query: *

Do the defroster hoses for 67-76 A/C cars fit lengthwise on the NON A/C cars? Are they longer? Shorter? Thanks in advance. Matt

I have been looking into either repurposing or even purchasing a universal coolant recovery tank for my project. I have several questions. What is the typical size recovery tank needed for a V8 to cycle the coolant? I am assuming 1 quart. Being mine is a vertical flow radiator (top tank...

Hi Y'all, I have finally gotten my 18" flexalite fan, and Shaguar XJ6 fan clutch. This gives me 1/2" spacing back from my aluminum radiator. I will still be needing a shroud. I plan on making my own out of spot welded sheet steel. Heres the questions How far should the fan be out of the...

HI Y'all, I am in the process of restoring my factory non A/C heater box. I removed and cleaned up the control cables and upon dissassembly, i marked each cable with tape, and put a corresponding mark on the heater box. I have since cleaned the heater box and all the markings got removed, Now...

Hi Y'all, I bought a spectra premium heater core for my 67 cuda. I got this at autozone a few years ago for $19.00 . Its all aluminum construction, and requires a little massaging on its mounting frame to make it fit well. On the flip side its about 2/3 lighter than the copper/brass one it...

I have a non A/C heater box i took apart 2 years ago to redo for my car. I packaged all the hardware for it, and now am finally in the process of rebuilding it. I have 1 clip i cannot figure out where it goes. Anybody here know where it goes, maybe have a pic of how its mounted, and where...

Whats the diameter of a 67 to 69 A body V8 engine driven clutch fan. Thanks Matt

Hi y'all I am looking at making a stock looking heater delete for my 67 barracuda. Making the firewall plates is easy, but i have some questions. On heater delete cars are there still plastic defroster vents in the dash, or are there flat covers? What is done with the cowl vent hole on...

Can you get a "desert cooler" type radiator for an M body dippy or fury lll ? I scored a 2 row which would be fine for my stock 318 that will initially go in my 67 cuda, i will eventually be building a 408 stroker for it, and will need something bigger.the dippy rad fits perfect, and with the...

I was able to scorescore a radiator that the part number says it fits a 1985 chrysler fifth avenue. This radiator directly bolts into my 67 cuda rad support using the original supports threaded holes with no modifications. The filler neck top sits 1&1/2 inches above the radiator support...

I have a 67 cuda coupe, original slant car. Im putting a small block in it. I got an opportunity to get a radiator from a 72 model 318 dart. Will this radiator be a straight across bolt in to my radiator support or will i need to modify the radiator support to use it. I dont care about fan...