Search results for query: *

Standard bore 1973 340 with 1973 340 heads (1.88" intakes, NO smog tube holes). Can include a 1969 340 intake. This is an UNSTAMPED motor. NO VIN, NO assembly date or info. Casting date 2/9/73. This engine was installed in my 1968 GTS convertible some time around 1980 (we bought the car in...

I have a pair of 1970 340 exhaust manifolds (Oct and Nov 1969 casting dates) and a 1969 intake. The exhaust has some rust pitting, but are overall pretty decent and even has an intact heat riser. The intake is in good shape with one thermostat bolt broken off. I may spend some time this week to...

I have a clean 1972 6139SA Thermoquad. $175/offer plus shipping. Located in Fresno, CA.

Rare factory dual four intake for RB motors. Will fit 383 RB, 413, 426W, and 440. Very clean. $350/trades considered.

1967 Barracuda 150 mph speedometer and tach. Both are in need of a complete restoration and are INOPERABLE at this time (water damage). The speedometer back end is frozen up, but the needle moves and sticks. The tach needle sticks and I have not hooked it up to test the electronics. Cosmetically...

I have a complete disc brake swap setup from a 73-76 A-body: Spindles with caliper adapters - $175/pair Gravel shields - $45/pair Upper control arms (ball joints and bushings removed) - $135/pair These parts are in my hot tank right now and will be clean, bead blasted, and painted flat...

"B" motor Edelbrock single plane intake (number ground off, but I think it's a TM-6 or is that a 7 for the B) - $90 "452" heads, good condition, but probably need a valve job and one exhaust stud hole repaired - $100 Alston Chassis roll cage main hoop, only - $40 Homebuilt DC k-member - $225...

I have a pair of 73-76 upper control arms and disc brake spindles. Spindles have dust shields and caliper adapters. $250 plus shipping from 93711. Parts will cleaned. I will also remove the ball joints and bushings. New ball joints and bushings can be installed for $50 plus parts. I will have...

I have an extra, already built, home-made Direct Connection k-member for sale. $225 plus shipping from 93711. Will weld up seams for an extra $25. Will also paint with black engine enamel or ship as it is, if you want to powder coat. I don't have an extra set of mounts at this time, but they can...