Search results for query: *

Hello again. I have two of these simple brackets. They are from a parts stash and I have no use for them. I just don’t want to throw them out. $5 each plus shipping which in itself would probably cost another $5.00 for a padded envelope from the USPS. PayPal is preferred. I usually ship the...

I have a used manual steering unit from a 1976 Dart Lite. It is the 5 1/2 turns lock to lock box and it is in great condition. I found no slop in it. I’m including the coupler housing to make for an easier swap since power steering couplers use a smaller spline shaft. The guts from the coupler...

I have one pair of these. They are from a 1985 Fifth Avenue. These are slightly thinner and lighter than the 1973-76 A body units but will bolt in the same way. These will fit ANY A body as long as the larger upper ball joint is used OR the spacers/adapters from Dr Diff that allow the use of...

Here are a matching pair or front disc brake knuckles that fit almost every 60-1989 rear wheel drive Mopar. These came from a 1985 Chrysler Fifth Avenue. The upper ball joint is the Mopar large design like all B bodies used and disc brake 73-76 A bodies. These have the slider caliper...

This is a vacuum booster pulled from a 1974 Duster. All brackets are included. Master cylinder had fluid in it when pulled. It may work, it may not. I've used these in many front disc swaps in A bodies and even a couple B body models. $100 plus shipping. Parts will be disassembled for...

I have a 7 3/4" dual diaphragm vacuum booster from a stash of A body parts. I think that it came from a 72 Duster but am not certain. The upper center location of the vacuum nipple may give a clue as to the specific application. The tag is attached but I have no way of researching the...

I have a factory aluminum manual steering box from a 65?Valiant. It is in great shape and ready to install. I did a basic cleaning of it but did not change the lube inside. It turns freely and has no damage. $75 plus shipping from Northern CA. I ship USPS unless the buyer prefers an...

Up for sale is a pair of used and dirty 1970 lower control arms with the sway bar brackets. These fit 1960-72 model cars. The arms are straight and since they are covered in grease, they are not rusty. :D The bushings are bad. Pivot shafts are aged but can be cleaned up. $160 plus shipping...

I have a set of FOUR Small bolt pattern center caps for sale. They are in good condition. Not perfect but still quite nice. They will need to be cleaned up a bit and repainted. $100 plus shipping. Granite Bay CA.