Search results for query: *

I have a buddy that lives near Raleigh NC that needs a 225 slant 6 that's in good running condition for his 69 Dart. Please reply with the mileage (if known), and your asking price

Need a good brake T-block and bolt/vent for a 8-3/4. Let me know via PM how much it'll cost shipped to IL 62009

I need 1 good 67-69 FB rear courtesy light socket. Just the socket, I have the lens/cover. Let me know what you have and the price shipped to IL zip code 62009 Thanks

I need 1 u-joint strap for a 1330 yoke. If I'm not mistaken the bolt c-t-c measures 1.4875" Thanks, Tracy

Looking for a pre 95 A500 core trans to rebuild. I live 50 miles south of Springfield IL and prefer something close enough (200 mile radius) for me to drive to pick it up Let me know what ya got

I need one passenger side shock/spring plate for a 8-3/4 rearend. It can be rusty but not pitted bad. The shock stud isn't a huge concern as I can replace them Let me know what ya got and the cost to ship it to IL zip code 62009

Looking for a good used set of either Rancho or Calvert Racing 9 way adjustable shocks for the rear of my 68 Cuda. Let me know whatcha got and your price. Pics please

Looking for a good used set of either Rancho or Calvert Racing rear shocks for my 68 Cuda. Let me know what you have. Pics too please

I need a rear courtesy light socket for a 68 Cuda FB. Let me know what you have with the price shipped to IL zip code 62009. NOTE: I don't need the lens/cover, just the light socket Thanks, Tracy

A buddy of mine is looking for a ready to run dist for his 84 slant 6. Possibly a Mallory, MSD, or even a good stock distributor with a Pertronix igniter already installed. Let me know what ya got and the price shipped to IL zip code 62088

I need some trim clips for my 68 Cuda FB. I need 2 of each in the picture. The one on the right holds the outer rear window trim in place and the others are interior clips for the interior rear trim pieces. I can buy the top one and one on the left new but I can't find the lower right one...

I need the small inspection cover that bolts at the bottom of a 904 with the 2 lower 1/4" bolts. PM me if you have one

I can get a new spool for $105 but thought I'd throw it out here to see if someone has one laying around their not using that's in good shape that would save me a few bucks. Also need a 10 spline 7260 (small) yoke in good shape (little to no wear in seal area, no broken off bolts) PM me with...

Don't have the money for a new set so I'm looking for a real nice used set of standard interior front door panels for my 68 Cuda FB. Prefer black but may consider dyeing another color if the deal is right. Let me know what ya got and the shipping price to IL zip code 62009. Must see pictures

I need a good solid patch panel for the front section of the drivers side rear 1/4 on a 68 Cuda. Not sure if anything but a 67-69 Cuda is the same. If anybody knows for sure please let me know. I've found a new patch panel for the pass side but can't seem to find a new one for the drivers...

I need a 7260 joint 29 spline yoke for an 8-3/4 that's in good condition. Must not be worn or rusty where the seal rides and no broken bolts or spread cap seats. I can buy a new forged one for $80 shipped so be reasonable. PM me with the price your asking including shipping to Ill zip code...

Need 2 large bolt pattern 15 x 8" plain jane steel wheels. 4" offset would be perfect. If no one answers with 8" wide wheels will consider anything I can find between 7-1/2" and 9" wide. All I care is they are straight and the lug holes aren't damaged. I can sand blast and paint them. Let me...

Looking for a real nice set of front door panels for a 68 Cuda fastback. They must be 68 Cuda panels, not Dart or Valiant panels as the pattern isn't the same on them. Prefer black but if their in good shape I'd consider most any color and dye them. I know what I can get new ones for so please...

Looking for a real nice used set of front standard (as in not deluxe) door panels for a 68 Cuda FB. Prefer black but if their nice enough I'd consider other colors.

Looking for a real nice black drivers side a pillar interior molding to fit a 68 Cuda fastback (notchback may be the same but I'm not positive). Let me know your price shipped to IL zip code 62009. A pic would be great too. I just need a drivers side, not a pair.

I need 400 block in good shape. Preferably stock bore that'll clean up with just a .030" over bore and in the eastern part of the US. I had one I was going to give a disabled member in need but it turned out to be junk so now I'm trying to help him locate one. I'm hoping to find one I can do...

Looking for a super nice pair (I'd even consider 1 if I don't find a pair soon) of black door vents for a 68 Cuda. Must have mounting studs intact and good seals and very minor to no warpage. Let me know what you have and your price shipped to Illinois zip 62009 Thanks, Tracy

I need a couple insulators that are used on most all round or square back alternators. 1st one I need is the one that insulates the "hot" terminal from the case of the alternator. Just need the outside one so the alternator doesn't even have to de disassembled. Just take the 1/4" nut off and...

I need a power steering control valve for a 68 power steering box in good working order. This is the valve that the hoses hook up to and is held on by 2 small bolts. PM me with what you have. Thanks, Tracy

I need the drivers side engine to auto trans. bracket for a 318, 340 or 360. Has to be the older shorter version. I'm not positive but I think 74 is when they changed to the slightly longer version. Let me know what you got with the price shipped to IL 62009 Thanks, Tracy

The upper resistor on the 2 speed wiper motor on my 68 cuda broke so I need one. Don't need the whole motor as I know the motor is good, just one of the wire terminals on the resistor snapped off. If anyone has a junk motor laying around they'd sell me the resistor from I'd sure appreciate it...

Trying to help a buddy locate some parts for his 70 Duster. He needs the seat belt shoulder strap hangers and 2 upper pieces of rear window trim in real nice condition. Let me know what you've got and what you want for it. Pics please. Thanks, Tracy

I need a drivers side lower control arm for my 68 Cuda. Doesn't need the sway bar tab. I don't care if it needs blasted and painted as long as it's straight and not rusted very bad. PM me with what you got with the price shipped to Illinois zip 62009

I need a rear courtesty lamp/bezel cover (guess that's what it's called) for my 68 cuda fastback. I want a real nice one. Or if you have a nice pair for a decent price I'd consider buying both. Must not have the mounting tabs broken or be pitted up! Let me know what you have (pictures please)...

Car is a 74 Challenger with a 727 and console shift. I need the linkage that connects the transmission shift lever to the shifter rod that comes down through the floor. This is the rod that has the shift linkage adjuster on in and I need the adjuster too. Must be in good shape. Please let me...