Search results for query: *

I have fabbed some MW and hemi scoops before for some of my builds. But, my latest kick is the long hood scoop for the 64 Fairlane R code 427 car. No I am just building me a toy not real! And NO 427 either! (Who hit the dark key!?) anway.. I want to reinforce the bottom side with a...

'My search shows few opinions. I have always had a big compressor and DA 'ed all my cars to bare metal. But... today I do not. What is the opinion of those that use this contour stripper?

Anyone have opinion of such???

I admit I never have had to deal with this, only maybe just a minor booger. I occsionally venture off into the dark side, in this case I have always wanted a 64 or 5 Merc Comet. 64 is one year model. Sheetmetal is not plentiful. You know the drill, look for a cheap project!! It will be a...

Yep it is a B body and even a more door! 64 Ply Belvedere. My first sorta custom and first more door. I did the bottom side in oem Antique Gold has sort of a greenish tint, the top is Spinnaker White, I want to do the top in black, but not sure if gloss, satin or even a "charcoal" black is...

Marine grade needed?? weight? Best supplier??

methods besides buying the SEM cleaner/prep in the aerosol?

I have a new blue tray that I want to make BLACK! What is best to use to do so?

I have a car that I did 5 years ago with my usual DA to bare metal, epoxy primer, filler, epoxy primer over filler, high fill urethane primer,epoxy primer with reducer whole car as sealer, Topcoat. I did it in single stage urethane. I am dong a color change for the wife. I am dead out of...

I hate using the stuff and I read while back that they changed the formular for aircraft stripper and it is weak now. Right now I don't have a big enough compressor to run the DA and take to bare metal. Is there a stripper that is worthwhle now????

Has anyone used this in place of rubberized under coat on bottom of car? It can b purchased in gal. can and sprayed with the undercoat type gun. Just wondering?? I have read where it is heavier than rubberized but tougher. I admit I have used the asphalt roof sealer in a tube in place of...

I have a car I painted about 5 years ago and want to simply change topcoat color. I did my usual steps of epoxy primer, sanding primer, epoxy with reducer as a sealer, and finally acrylic urethane topoat. Question is after I scuff the car, is it necessary to put down a coat of epoxy primer...

'67 Dart, it was a vinyl top car, just surface rust but it is pretty banged up looks like a kid played on it. Looking at it to buy as a project. Cheap enough car. The roof is the only concern. Can I get the roof back flat enough for a vinyl top, shrinking with a rosebud and some filler...

I admit I have painted all my cars since about '90 in acrylic urethane single stage. I did just one back in '90 is bc/cc system. I am no pro but I have painted a few dozen over the years . Here is what I am wondering. Going to redo the wife/s car in '69 B3 Blue it as done 5-6 years...

I have seen the name but know nothing of it. I have used a lot of product from TCP Global over some years, but they have changed a lot , maybe sold to someone?? I like their epoxy primer, but they do not show what I have been using, just an epoxy primer/sealer which I tried but do not like...

I admit I have been my own bodyman for several decades now, but I moved to Tx 2 1/2 year ago, thus no place to really work or have a real air compressor. For several reasons I do not want to buy another "real" and adequate compressor right now. I know their 21 gal I think it is a 2 1/2...

I bought the Permatex brand to glue the sucker to the windshield. Wlll it was old and dried out, no good. Will super glue do the deed!?????

I have a gal. of acrylic urethane single stage top coat , and gal. of acrylic urethane primer, they have gone thru a could of Missouri winters, in unheated shed. Does such affect this in any way??????

I have used it couple decades ago, I clean the metal I will weld good cleaned metal, plap disc ed, cleaned it with phosphoric acid sol. I read about the weld thru primer stuff now, is it anything more than a self etch primer???? Welding the wheel opening and the inside edge of outer wheel...

I have a gal of acrylic urethane, urethane primer, hardners, reducers,.. Been back at old place is Missouri 2 winters. Does cold affect this???? Got it home now and have use for it.

NO sharktooth!!!! Just the plainjane grill. What is correct, looks like faded satin black????? Thanks

anyone with experience with this.

yes I know of Mr. G's and kit on fee bay < BUT I only need screws for the upper and back side panel trim. I am guessing #6 machine screws, 3/4 to 1 1/4 or 1/2 long???? thanks

I relocated to s e Tx and have a car I picked out that I want to touch up a few places, and no compressor for a while. I found a somewhat local auto paint suppler that carries this system. basically an aerosol can that mounts to a jar and has gun...

you know, the ugly stuff so you don't get a door ding crap. ruins the look of the car. it is coming lose at a coupe of ends, it has that rubber looking material in its center and glued on. the paint is original but very nice. what can i do to remove that...

I got some dust on it on places and not real pleased with my total results. I have never sanded this before. what will I end up with wet sanding? somewhere between 1000 and 2000 grit??? will it require a buff?

I use acrylic urethane as my topcoats. paints really bother me. yes it would be nice to have a fresh air suit, but..... primers that are low VOC are no problem. looking for low voc for topcoat. I see Summit offers a low VOC acrylic urethane, but not...

search engine? naught ( 0 )! ( zero!)..... I know I have seen tintable undercoating spoke of on here..... as I get old and less "anal retentive " ( sorry anal retentive folks!)...... just more senile!??? LOL''.............. I tend to do my...

I drug home a 67 Bel 1, repaired rear qtr with the only patches available, pretty sorry stuff. I never had one, but seems like years ago I saw a tool that will mold to the body curve to help get the curve right with filler. weems like it was made of...

I went into the pro paint store after Body Schultz undercoating. the guy pulls out this not realizing I wanted UNDERCOATING! and I didn't notice! I understand this rust preventor is designed to use like inside doors, etc. just wondering if anyone has had...