Search results for query: *

Like the title says, looking for factory-type (OE, Crane, Isky etc.) adjustable iron rocker set for a BBM. I'm building a 440 and want to go with a mild solid flat-tappet cam, I want affordable rockers that will last but nothing fancy and not aluminum.

I'm building a 440 to swap into my '72 D200 and need an oil pan AND pickup for it... let me know what ya got!

I'm looking to put a 440 into my '72 D200 and I need a rear-sump truck oil pan and pickup as the core engine came from a C-body. Send a PM with a pic or 2 and an asking price, I do have the C-body pan I'd be willing to trade but it's very dented. Peace!

The 904 in my 70 Duster recently stopped working entirely, there was no line pressure so I pulled the VB and it has a massive crack in it. I just need a replacement stock VB in good shape I can swap the shift kit parts over to from my current one. I may consider an aftermarket one as well as...

Looking for a used intake in decent shape to convert my old truck from 2-bbl to 4-bbl; Edelbrock Performer or Performer RPM or a Weiand Action Plus or Stealth or similar.

Like the title says, I'm in need of brackets to bolt a Saginaw power steering pump to a Mopar small block LA engine, it's in a 1970 Duster if that matters. Anything goes, doesn't have to be pristine just something that is usable and I can clean up without too much fuss.

I'm looking for another RWD older Mopar to ease my addiction withdrawal after the 360 blew in my '70 Duster... No C-bodies those are just too big and impractical but pretty much anything else in the $1000 range is fair game (4-door A-bodies, '70s B-bodies, F-bodies, '80s M-bodies etc.) with a...

I'm putting together my cousin's 1971 Satellite which we pulled the original slant-6 out of with the old K-member and all the steering linkage; threw away the slant but forgot to grab the linkage. Anybody here happen to have a center link that would work on this car? I already have new tie-rod...

Looking for an A-body charcoal canister, these came on '72-'76 cars and were mounted near the right front corner of the engine bay. Condition doesn't matter as long as it works. I also need the bracket it mounts to.

Just realized we now have a Tires and Wheels classifieds forum so I re-posted here... I need a pair of big-bolt-pattern (5 on 4.5") 15 x 7" aluminum slotted mag wheels (U.S. Indy/Ansen style), with 3.75-4.0" backspacing. Not looking for polished ones in perfect shape just something I can...

I need a pair of big-bolt-pattern (5 on 4.5") 15 x 7" aluminum slotted mag wheels (U.S. Indy/Ansen style), with 3.75-4.0" backspacing. Not looking for polished ones in perfect shape just something I can clean up, spray paint and put on my car for the least amount of money.

Hey all I swapped a 360 in place of my 318 and the driver-side brace going from the block to the bellhousing is about an inch too short... Anyone got the longer one I need? I'm also looking for the special clips that hold the sections of kickdown linkage together, not really sure where to find...

Hey guys I'm still looking for a left-side engine mount bracket for a 340/360 as I'm swapping a 360 in place of my old 318 in my '70 Duster. I also need all the shifter linkage hardware (rods, joints, etc.) for a stock A-body 3-speed automatic column shifter as I stupidly threw away mine...

I'm swapping the 318 in my '70 Duster for a 360 and need a passenger car (center sump) oil pan and the wider mounting bracket for the one side (forget which...), let me know what you have.

I'm looking for a set of 4 15" Rallye wheels, big bolt pattern and preferably 7" wide or larger. I'm on a college student budget also so I'm looking for a set under $400 which is around the price of a new set from Wheel Vintiques.

Hey everyone, I'm looking for a pair of front mud flaps/splash guards for my 1970 Duster. Doesn't matter what they say on them (Dodge or Plymouth). PM(preferred) or e-mail at [email protected] .

Hey everyone, I'm looking for an Edelbrock Performer 600 cfm carb, preferably electric choke (#1406). It doesn't have to be in perfect shape but at least in usable working condition without needing a rebuild kit. Looking for around $85 for one, if anyone has one shoot me a PM (preferred) or...

Hey everyone, I'm looking for an Edelbrock Performer (non-RPM) intake for Mopar LA small-block. Almost got one before off FABO but ended up not having enough money, but that's not an issue now. If you have one you'd like to sell please PM me or shoot me an e-mail at [email protected] .

I need a 2-groove crank pulley from a late-60s/early-70s big-block (or possibly small-block) that is around 3 inches deep overall from the front edge to the rear edge. I am converting my 1970 318 from A/C and P/S to non-A/C and P/S and need the proper-depth crank pulley (the other 2-groove...

I'm looking for a two-groove crank accessory pulley for a non-A/C power steering 318 car as I'm removing my old A/C system. I am also looking for a non-A/C alternator mounting bracket, the triangle-shaped one that goes in front of the alternator and connects to the water pump. If anyone has...

I'm looking for an Edelbrock Performer (non-RPM) intake for a small-block Mopar. I don't care much about the condition (dirty or clean is fine), as long as nothing is broken or needs repair. If anybody has one for sale please let me know with a PM or reply post.