Search results for query: *

This is a 68 Barracuda with 408 blueprint engine stroker with their Ready to Run distributor that comes with an internal ignition. No ballast. I rewired a good amount under the hood and dash and swapped out the bulkhead connectors not too long ago. I'm just now attempting to start the engine for...

I just did this exact same thing last year on my 75 D100 and after removing the snap ring, the bearing just came right out after pulling on the column cover. Fast forward to today and I've wasted an entire day on this thing. I have the snap ring removed and this bearing wont even budge when I...

I'm looking to combine my order on rockauto to save on shipping but they don't carry a turn signal switch for a 71 Duster. They do once you hit 73 but that switch is definitely wired differently. I recently did the turn signal switch in my 75 D100 with a switch I bought on rockauto and I'm...

The other day my truck went from firing up every time immediately to now turning over and over before sometimes firing up when releasing the key. It'll turn over without even a hint of wanting to start but as soon as you release the key it either fires up or at least tries to. I got out a volt...

The old ignition switch for the truck won't run accessories when the key is in the run position (when it's cold out) so I set out to replace the ignition switch as well as the broken turn signal cam. When I pulled the old switch out and compared it to the new switch, they're pretty similar...

This is on a 75 Dodge D100. I was running late to work today and haven't had time to even mess with anything but I noticed all the parts I listed in the title weren't working on my commute today. The headlights, alt gauge and dash lights all worked. I popped the fuse box cover on the dash and...

I'm going to clean up the electrical under the hood of my 71 Duster and I'm looking to get some tape that's at least somewhat close to stock without breaking the bank. I've done a few searches on here and a lot of guys are saying the original wire tape was made of non adhesive vinyl. Even the...

Reading all the posts about the iffy mopar ignition modules that are out these days, I was wondering if anyone has ever tried to remove the epoxy to see whats going on underneath? I have no idea how complicated they are but I wonder if it's just a couple of cheap electronic components in there...

Working on a 71 Duster, decided to pull the cluster out to lube the speedo cable, swap circuit boards because of a broken pin and clean up the lenses that got pretty hazy. I got the cluster back together and connected the alternator gauge, headlight switch and circular connector that goes onto...

Yesterday on the way to work I noticed my headlights were dim and my turn signals stopped working. Also the radio would cut in and out every 5 seconds or so before I shut it off. I figured the alternator was the problem. My ammeter was reading lower than normal. Today I go out and swap the...