Search results for query: *

My brother and I are rebuilding a big block 727. Looking for a complete stock rebuild kit, no racing. Will use red clutches and kolene steels. What kit has every seal, bushing, rings, and clutch bands included? Who would I buy from?

Hello. On my 8 & 3/4 rear axle, which gasket goes where? Theres a couple 5 bolt flange gaskets, with a flat on the top. A foam/paper and a steel gasket. Does the foam one go behind the backing plate, and the steel on the front where the bearings are? I converted to the green style bearings with...

My brother and I rebuilt my 904 to go behind a mild 318. We used a high performance rebuild kit, with red clutches, kolene steels, a HD band strut with a 4.2 lever, red low reverse band, red second gear band, and a rebuilt front pump, with a PTC 3000 stall converter, and a transgo 2 shift...

not sure if it matters, to me it dont seem like it, but take a look at the pic, should the hot fluid from the trans flow to the bottom port of the cooler and the cool fuid out to the top or vise versa, or does it not matter? do i make sense??

im probably gonna get flamed for this one here, but what the hell...as i was under my car last night trying to install a set of factory prebent lines for a stock car that has been heavily modified, they dont fit worth a damn. tried bending it by hand a little to tweak it and i went to far and it...

how much power can a stock flex plate withstand? its for a 318/904 with a PTC 3000 stall converter. performance rebuilt 904 with red clutches and kolene steels, transgo 2 shift kit. 355 sure grip rear. my 318 has about 375 horsepower, with nice cam, rpm manifold, roller rockers, RHS heads from...

318/904 tranny. PTC converter. are there any special tips on how to install torque converters? need a little help. seems i cant tell if the torque converter is all the way seated in the tranny. how do u properly line up the slot on the TC into tranny. how do i tell for sure if its installed...

I have a griffin aluminum radiator with no built in tranny cooler. Which coolers do yall use or recommend? Do you use a fan or no fan? Jegs brand, summit brand, or name brand like B&M? Do you recommend a plate and fin style or a tube and fin style? How do you mount them? Do you use hard line or...

So...I think I need a driveshaft...What I have is a '68 Cuda 318 (400 HP) / 904 / 8-3/4 rear. The one I have I think is slightly bent outa shape...Looks like the previous owner just beat the heck out of it...So, that being said, Should I find another used one from someone on here, (I know they...

hello. how do you guys perform this mod? do u have a shop do it? a guy with a lathe? should i send it to a tranny shop, like cope or other? maybe contact trangsgo and see if they have one already made? ? i have a couple machinist friends say theyd have to make up a tool to hold it, and then...

Hello. Is it a worth while swap to get a new pinion yoke and slip yoke with 7290 u-joints to replace the 7260 stuff I have? Since I need my drive shaft rebalanced, shouldn't I go ahead and have the ends cut off and new 7290 ends welded on?

Yep, this is what I'm doing on Christmas day. I don't have anything else to do, anywhere to go, no one to see...So, here I am at home on Christmas, rebuilding my 904 in the rain...:( Here are a bunch of boring transmission tear down pics...(This is my first time ever doing a transmission...

Who runs them? Steel or aluminum? Fins/no fins....I'm lookin for a good aluminum pan for my 904/ smallblock...Who do yall recommend? Do ya like the summit brand one? http://www.summitracing.com/parts/SME-1010R/

Hello friends. Just a quick unimportant question...I've noticed the transmission crossmember bolts on my 1970 Dart take a 9/16" socket (3/8" bolt) and on my 1968 Barracuda, the trans crossmember bolts are much bigger which take a 3/4" socket. (1/2"bolt) Is this normal? Did chrysler change bolt...

Hello everyone. I have decided to rebuild the 904 tranny out of my 68 cuda. I have a mild 318 with about 350 HP, but I would like the tranny to be built to support about 450 HP for future engine upgrades. So, what is your guy's recommendations on parts I should use? What clutch packs...

Hello everyone! I would like interior pics of floor shifted automatic trannys, whether it be the factory center console, or an aftermarket floor shift unit. In particular, I am installing a Cheetah SCS floor shift unit for a 904 in my 68 barracuda. So if you have pics, please post them, Id like...

Hello FABO. What would you guys recommend for an aftermarket floor shifter for me to use? The car is a 68 cuda with a near stock 318 and a column shifted 904 tranny. I am having issues with the column shift linkage and just cant get it to work right. I would like to do away with the column shift...

hello. installing green bearings on the factory 8 3/4 axles. I have a 742 case 355 clutch type sure grip...I heard/read I have to take out the little thrust button in the center section. Is it a must that I remove it to use green bearings? I tried to take it out with a magnet, and needle nose...

Hello FABO friends. I am rebuilding the 8 3/4 axle I got out of a B-Body to install in my A-Body. I tore it down to a bare housing, cause I have to move the spring perches 1/2" in on each side, and I'm gonna rebuild it. Where would you guys suggest I get the parts? I'd like to stay with the...

hello. i have a 68 cuda fastback. originally came with a 318, and 489 case 8 3/4 rear. how do i tell what tranny it has by looking at it underneath the car?? 727 or 904?? are there a different number of bolts on the pan? i cant find any numbers on it from what i can see...