Search results for query: *

for initial startup I've always set the timing at 15 BTDC with a reluctor tooth even with the magnet tho with electronic dists from what I hear I will likely go 20 on my next one. I see UTG & power nation vids & they both say set the initial where you want it (one said 30 BTDC) & then twist the...

70's squareback. can I rebuild this at home & if so what areas do I attack? I have one that O'reillys says is only putting out a few volts iirc. O'reillys has a pulley puller if needed. thank you for your time. RR

63 dart stock car. blue high performance MP voltage reg. race hei module. pertronix flame thrower race coil. std 70's square back alt. 12V battery behind dr seat. I was thinking of useing a megafuse right at the battery (on pos or neg cable?). I had seen alot of posts regarding megafuses but the...

1997 dodge ram van. when engaged the wipers sweep across the windshield back & forth like normal but when you turn em off they park at the far left of their sweep pattern (11 o'clock). any thoughts on what this might be? thank you for your time. RR

the original high performance one. thank you for your time. RR

dirt track stock car, race duration ~30 minutes OE 70's square back alt. Mancini offers 2 MP ones & one of their own. which one should I purchase? thank you for your time. RR

63 dart. basic stock car wiring. battery right behind the seat. how should I go about protecting this circuit(s). battery positive to starter. In that line it T's off to power the ign/starting. A youtuber had a basic diagram & mentioned megafuses. how do I proceed on this? what do you suggest I...

got my camera connection figured out (sort of!). Here is a pic of the dist I am trying to identify. thank you for your time. RR

I have a device that has a mini bolt (1.6mm) that will be adjusted several times through a steel plate with threads showing on each side of the plate & is subject to a fair amount of vibration & I will need to adjust it several times. I have edelbrock gasgacinch, permatex high tack, multipurpose...

fold a dollar bill in half & I miked several of em & yes .009" thick (gotta love utube!)

will this coil last without a ballast resistor in a race app or should I wire one in? thank you for your time. RR

Wiring the stock car. (1) field wires to alt) (2) batt to alt charge wire (3) starter relay to starter solenoid (4) wires to voltage reg (5) wires to high voltage coil. (6) main feed wire to ign switch. thank you for your time. RR

what should I use? thank you for your time.

63 dart stock car. rules want a main cutoff on/off switch. battery on the floor on the passenger side fairly close to the driver. should I run the large cable from the battery positive down to the starter or should I run from the battery to the switch then from the switch to the starter (my...

does anyone know of the brand/part # of the part with the adjustable knob to advance/retard timing? I have a MSD 8680 but it requires a several hundred dollar MSD box to go with it. thank you for your time. RR

360 2bbl 9-1CR circle track. races may last 15-30 minutes. I purchased a pertronix Ecoil #60103 with 0.32 ohms. which (HEI type) module should I purchase? Their D72000 module is a multispark unit & their D2070 race unit is not. which would you recommend? thank you for your time. RR

circle track 1/3 third mile dirt. 360 9-1 2bbl. No ign "boxes", MSD I would think they are referring to. max RPM maybe 6000. what ign system (box/ballast/coil) would you recommend? I have OE electronic dist. I have OE 70's HEI module & "standard motor products" HEI module at the moment along...

I have a 65 dart & can get a harness from a 63. The new restoration harnesses have a diff # for 63 & 65 so I was wondering if I could use it as is or what is different or maybe would I have to add a circuit or two. Can anyone help me with this? Thank you for your time.