Search results for query: *

That would be great :)

I am in Hallsville Texas, small town in east Texas between Longview and Marshall Texas, 60 miles from the border with Louisiana.

Still interested in a set of J heads with 2.02/1.60 shipped to 75650 in Texas

Same here info in earlier PM

Excellent, looking to get some J heads ASAP.

I have no idea why people that have no clue what they are saying state such easily debunked dribble. Here is a photo from the book written by Cliff Ruggles on how to modify Rochester Carburetors for high performance use. Book is called How to Rebuild & Modify Rochester Quadrajet Carburetors...

The Mopar guys love the Thermoquads, GM guys love their Rochesters, and everyone hates the Autolite carbs. I love all cars, I have GM cars, Ford cars, and Mopars. I like Mopars more than the others, but they were all great. I am the same way with carbs, no brand alliance. The Thermoquad is a...

I would put a mild 440 in it with a 727 for the sake of simplicity, but if I was really going for it I would put a 4 speed. Clean it well and polish what you can of the original paint, new carpet, redo the front seats, put a repro R/T hood on it and paint it flat black with rattle cans, add the...

The 50cc accelerator pump arm may be adjusted too tight and it may be bottoming out the diaphragm on the spring causing it to coil bind. This can create a pressure peak from the fuel pressure pushing against the diaphragm when the throttle is slammed open rather than being absorbed by the...

Just by looking at that photo I knew that engine would run hot. As stated by others, the radiator has to be flush with the radiator support or air will just go around instead of through it at speed. A lot of the aftermarket electric fans can't really keep an engine cool, I have been there and...

Start by getting a shroud, I am willing to bet that with just the proper shroud your issues will be over. Put a vacuum gauge to manifold vacuum and adjust your idle speed screws on the carburetor to the highest vacuum you see and then give the screws another 1/4 turn rich, make sure you have no...

I have seen this a thousand times, the truck has no low end power as the cam is way to big for what you have. I would be willing to bet that the truck has a stock converter, stock highway gears and the factory 8:1 (if you lucky) compression. I used to own a speed shop back in the 80's and 90's...

Just let me know the total price and your PayPal email.

Give me a quote to 75650 in Texas. I am sure that it will be at least as much to ship them as the price of the heads.

Any small block J heads still available? Hopefully a set with 2.02's, will take a set with the smaller intake valves.

Have a 2020 Challenger Hellcat Redeye Widebody, very comfortable and quite fast car, but I just do not love the modern muscle cars. I also have a 2016 Corvette Callaway SC757 Z06 7 speed manual, rides even better than the Challenger, as unbelievable as that sounds (magnetic ride suspension)...

I just saw this thread on the weekly email I get from the forum on popular threads. As soon as I read the beginning of the thread I was almost 100% sure that the issue was with the magnetic pickup gap being too wide. I used to sell a ton of MSD boxes back in the 80's and 90's and I ended up...

China can 100% make good product. It all depends on the factory that you choose and how much you are willing to pay for the product. Better factory better quality = more expensive, poorer factory poorer quality = less expensive. The biggest issue in China a lot of the times is not the factory...

The issue was not that Speedmaster copied the Broader transbrake, the issue is that the used the Broader Performance trademark on it, and not only is Speedmaster legally liable for trademark infringement but all their dealers are also liable. Summit and Jegs removed the product from their...

Believe me if you have a valid active patent in the USA and someone copies it and sells it in the USA they are 100% getting sued. I have been up and down the patent and trademark infringement road many times before. I have been in the performance automotive aftermarket all my life. I have been...

I don't care if anyone copies a W5 head or where they make it. As long as they make a good product I would buy it. It would be really nice if they made the head in the USA, but if they did it would end up being quite expensive, which would be fine except for the fact that if it starts selling...

I am not justifying anything. First thing is that you are assuming that by copying a product there is some intellectual theft involved. There may be or there may not be. Was there any intellectual theft on SM part of the Broader product? Probably not, he was not the first guy to come up with a...

Books fall under copyright laws and so does music. It cannot be copied for obvious reasons as it help its creators control and receive payment for their works. If no copyright laws existed books and music would not exist in a commercial sense. You would write a book and no one would publish it...

If you do not want your product to be copied or "stolen" you need to patent it. I now have over 50 patents to my name as we do not want the product that we come out with copied. There is no theft in copying a product that is out there and no one took the time of effort to patent it, or it has...

I have been manufacturing and importing automotive aftermarket parts from China and Taiwan for over 20 years and I will try and explain how this happens and has happened to us. As far as SM is concerned this is 100% a mistake from the overseas supplier. The supplier was NEVER supposed to engrave...

I come up with $248.85 with shipping and the 3% through PayPal. I am in East Texas Zip Code 75650. Let me know if that works for you and your PayPal email and I will get the funds to you ASAP.

Is the carb still available?

100% it's a knock off copy. If it's $80 on the manufacturers website and you bought it on Amazon for $16 it is a counterfeit. I have had my share of buying counterfeit product on Amazon. Their shelves are full of it, and the third party sellers make a killing doing it. Amazon also does not care...

Are you sure that you have a 360 in that car and not a 318 with 360 heads on it? Since it seems that you just bought it anything is possible. I would expect a low compression 318 with 360 heads to have cranking compression like what you are seeing. Have you checked the block to make sure that it...

On this particular kit I would not know, but you can look at a million examples of this like anything Speedmaster sells, the copies of Holley carburetors and fuel pumps, copies of Carter mechanical and electric fuel pumps, copies of the Edelbrock heads and intakes, the new copies of the...