Search results for query: *

Yup.. that mic sucks... sounds like mad valvetrain chatter. Glad to hear you go it it sorted... as others have said, now go have some fun! Don't feel bad about bashing the eff outta the headers. I got a nice shiny set of ceramic coated longtubes for my big block Ford... what they looked like...

Nothing wrong with the Petronix, I've used them and as long as they are installed correctly you should not have any issues. That said... HEI is the way. MY2C.

That's the heater core hose on my 360 intake.

I used a set from Mancini Racing that are made by Harland Sharp on my 360 LA with a mild flat tappet cam... no issues whatsoever. Overkill for this broomstick of a cam but they had a sale and I said why not. Hardest part nowadays is getting the correct length push rods. GL!

You'll likely keep the MP cam IMHO... this one is really mild. GL!

Not a fan of clear.. but definitely hit it with something.. don't leave it bare. I used regular engine enamel on mine and it's still holding up fine.

Air Filter Horsepower Shootout! - Engine Masters Ep. 27

Dang.. I paid $1400 for a pair of ProMaxx in 2021...

Lil late, but I like mine... sealed great. Only issue I had was the counterbore was a bit tight for the socket head cap screw hardware that came with it. Just got a slightly longer stainless bolt, split & flat washer... solved. No gasket or RTV to mess with...

^^^ Looks awfully familiar, about .100 in the hole at a guess. Should run on pump gas just fine. :thumbsup:

I could not get the Moroso to seal either.. even with aluminum heads and cast valve covers. Ended up using these double stack Felpro cork jobbers with a bit of right stuff...

That MP cam will do nicely... IMHO run it!.

Is that short block Magnum or LA based.. what cam is in it? thx

If it's in the budget.. I'd recommend some QA1 single adjustable. Cannot explain how much better these are than stock shocks... feels like a different car with them on all 4 corners and you can dial them in to your ride preference and style. Liked them so much I put them on all 4 corners of my...

Honestly not sure what kind of "seat of the pants" difference the slight bump in compression results in as opposed to other changes. My 360 has a stock bottom end as well.. dished pistons .100 in the hole with a 268H cam (.450/.450). I used a set of 1:6 ratio roller rockers so valve lift is...

^^ This. My mindset when I freshened up the 360 in my Challenger. Peppy but well mannered. I'm running a 2.76 open rear in mine as I frequently drive open highway and it's nice to hold the fast lane and still get 18mpg... up to 23mpg if I'm lighter on the fun petal.

So where CNC ends epoxy begins?

Running TTI's on my 360LA... full size Wix 51515 right to the block w/o issues. Also installed one of those Lava oil filter heatshields because why not.

^^ As posted above... Right Stuff & lots of it.. my 360LA...

Sounds right.. think 63~65 timeframe was when they switched to alternators. Looked into a 1 wire replacement for my 74 Challenger but they all seem to come with a pressed on single groove pulley. Ended up with a Powermaster 95A. The fans on my radiator alone can draw 70A at startup.. still...

That's odd.. a jenny? Honestly never heard of that and I've had my 67 Lane 30 years & been to a lot of shows.

Think you'll be fine on pump gas... and yes be careful on cam selection. :thumbsup:

I feel ya.. china rail seeping oil is my bane so I use Right Stuff. Usually once you get one corner moving it'll release. Razer blade followed by a wire brush usually does a good cleanup. Ultra black will likely be fine as well.. just be sure to measure the gap and get a good size bead in there...

And yes... lot's more RTV. I like Right Stuff.

Me <== checks dates on thread. Just over 3 years too late to put to rest this myth... lol. :p

Does Schumacher not offer poly locker's any more? I use a poly locker on my drivers side and regular rubber mount on passenger. Does a decent job of not sounding too much like solid mounts unless I'm on the skinny pedal. GL!

Not Speedmaster.. but I got 63cc heads to bump the compression on my 360LA a bit. Slugs are a full .100 in the hole so I did not have to worry about interference. MY2C

Can you linky~dinky which one you ordered? Good info!

Easy to miss if you are not looking for them. LMK if you need any additional photos.. GL!