Search results for query: *

looking for a part or 2 depending on the actual remaining parts needed for the rear inside of a 65-66 barracuda. (no, I haven't had one in 10 years and forgot what I did know about the trim in that area since mine was perfect when I had it and won't get my new to me one till next year(he said so...

I'm looking for a set of all there but not perfect sill plates that I can get a scan from time make a press mold from, they don't have to be perfect just all there and straight

I'm looking for these 2 rear window trim pieces in this picture. I'm trying to make a mold of them so I can reproduce these and the 2 bigger pieces for the barracudas. I have to 2 lower pieces(well most of them and have a mold 90% done for those part but I'd like to make it a set of all 4)...

I"m looking to expand my parts list (since I"m on lock down for the forseeable future:() and need at least a good passengers side heater delete fresh air box for the 63-66 models that I can tear apart for a model and probably the later ones as well. Door that are broke with all the pieces...

Glove box light assemble for a 63-66 dart or valiant. yep, want one or 2 to test (also for my 66 dart) so I can make my glove box liners fit and work correctly

I'm looking for a 64-66 Plymouth Dash (any color will work) pad in good shape to make some molds from, the better shape the easier it will be for me.. thanks pm me with pic's of the pads.

the engine numbers are 8 w 225 6079 . sooo I'm assuming it's a 68 (could it be a 78 since it's not red) 225 solid lifter block I need the timing tab that goes on the front timing chain cover

I'm looking for a manual convertible top hold down latch that is in the well area that holds down the convertible top when the top is lowered and before the boot goes on. and the metal piece also . Thanks

I'm looking for the rear tail light wiring harness and sockets section on a 65 dart in order to make changes to my LED design to work on the 65 that I will be resto-modding for a friend that does not have any wiring at all. thanks

I'm looking for a rear finish panel for my wife's 66 dart GT. someone decided they needed it more than her and took it in the middle of the night. It doesn't need to be perfect since I;m going to strip it and refinish it myself. pm me with details and pictures please thanks. this is the part...

I'm looking for a few different years 63 (if they had a dash pad) through 65 dart and valiant dash pads. I don't want good ones just need the old cracked crazed ones to strip to metal and check against my good one to build new vacuum forming molds and foam pouring mold. just to see how hard it...

in need of a complete plastic housing for my 66's rear bumper license plate light. mine is cracked from storing it wrong and I can't find all the little itty bitty pieces that scattered everywhere. here is what it looks like except not broken please:D evidently I can do the broken thing...

yup got both sides of the convertible cushions and am now looking for the left hand HARDTOP cushions from a 64- 66 valiant,barracuda or dart (don't know about the 63's) they are a lot different than the convertible part the part number might be 2163255 or 2163253 I have the 254 partnumber in...

I am looking for a good drivers side Wing vent/side glass cushion for a convertible. part number Looks to be 2217573???t Lh it is different than the hardtops here are a couple of pic's of the right hand(driver) and partial left hand and it goes here mine broke and flipped...

I'm looking for a passengers side door lock cylinder with lever for a 64-65 dodge. It's the skeleton hole type. or a set if ya got it. buddy of mine broke his and the key got stuck in it. thanks

I was over at a friends house looking at his car and discovered that it didn't have any door lock clips. so I'm in need of these clips that fit on left and right door. goes from the door latch to the door lock cylinder. anyone got some for a 66 dodge dart hardtop thanks

I thought that out of the 2 darts I could have lucked out and had at least 1 good one to make a mold off of, but no suck luck. so now I'm looking for a non rusted through header seal channel and those 2 side pieces for the early A's so I can get a good mold off of them to cast in resin. here's...

Yep as the title says I need the under hood insulation clips for a 66 dart. I have some of them but still need about 15 or so. Yeah I know I can get them new, but I don't need a whole set for my dart (I 'll buy new for the wif'e car unless I can scrounge enough to do both) here's a pic of them...

mow that I'm close to getting the instrument cluster put in I discovered that I have some screws MIA. does anyone have these screws for the 66 dart speedometer bezel? 1 (maybe 2) long one(s) I think and 3 short. I'm for sure on one long one because it goes into the top left corner and is about...

I'm looking for (1) Left outer tail light bezel with screws. in good condition for a 66 dodge dart chrome can be hazed since I am going to make rubber molds of the bezels and cast em in acrylic to finish up my led setup.

I'm looking to get (2) set's of these corners in good shape. Both my darts either don't have them or they're rotten the one set pictured just crumble if I touch them. and a drivers side convertible sun-visor for the 66 dart. thanks

Yup getting close to putting back in the interior and discovered that didn't keep the seatbelt bolts that go into the floor. I need 2 of them if anyone got some extra's for a 66 dodge dart convertible thanks Kurt

I'm looking for the corner pieces for the dart that go on the corner of the top and lock in the stainless pieces, Need both. I missed this one but here's a picture of the corners I only need the top 2 pieces and not the transition piece. the corners lock into the stainless trim that holds...

Hi I'm looking for a backup set of rear window regulators for a 66 dart convertible. I'm not sure that the hardtop will fit. (it might I'll have to take mine over to Waggins to do a check) I want to add power to the rear windows and have a way to go back to normal if I screw up. thanks

I just got the Airboxes and inside assemblies from a member here (thanks Tubar/John, parts are AWESOME!) and discovered I need some extra parts to finish up my conversion to a factory style (inside the car) A/C system I'm looking for blower motor resistor @ 2521544 and evaporator switch...

66 dart or (65 Plymouth satellite) lower rocker molding clips Got em for one dart from a FABO member but need MORE of em for the other dart and satellite. AND 66 dodge dart hood letters needed for a friend, I got mine in the mail from a FABO member. :toothy8: don't have pic's of the hood...

I'm just finishing up my dart and discovered that I don't have the hood letters spelling DODGE for the hood on my 1966 dodge dart. I was going to rob them off of my other dart and discovered that they are gone too! I called a few friends that have 66 darts and parts cars, guess what no extras to...

I just scored a great offenhouser dual single barrel manifold and need a matching carb (good one or a rebuildable one with a good throttle shaft) the back carb (one on the right)is the good one (or at least rebuildable) the front one has worn out throttle shaft bushings(on left) price...

as stated in the header I'm looking for a 73 and up disc/drum proportioning valve. I'm getting close to ordering brake lines and want to have the valve handy when I call Finelines to get my lines for my 66 thanks

Does anyone have a source for the lower rocker molding clips that fit on a 1966 dodge dart here's a pic of them (front and back side) thanks