Search results for query: *

I have a SSI 041 Mopar LA camshaft and after I vinegar dipped it to chase some rust off it (worked but now its covered in orange patina) I found 3-4 lobe tips had some pitting on them. It may be good core for a regrind or a polish? Free for shipping from 92780

This is a hydraulic control line that is a pusher but needs a return spring to properly return. It's most likely a throttle cable from a sand rail (PO was a dune buggy guy) but could also be used as a kick down for a Mopar trans. 3/8ish Poly oil line is broken from years of sitting in my garage...

This is local to me on craigslist. Maybe some interest to our So. Cal members.....B&T flange, $295 1960's A-904-G Automatic Transmission Mopar - auto parts - by owner... In a pinch I could possible buy it (paypal advance) for anyone and you can pick up at spring fling on Sat AM. I may even have...

Put your 6 on a diet. Good shape with EGR valve attached. $85 shipped in USA. Easy to work with to make an injector or 2bbl manifold. it's the blue one.

Pulled from an old rebuilt center section I picked up from a closed rear end shop. It still has the dark red lead paint on them. I pulled them for a member but it didn't go through. The gears look good, the cross shaft has some shine to it where the spider gears run but its nothing. I have the...

Mopar NOS 1957-64 Full Size & 57-66 Imperial Wiper Motor Gear Pkg 1879598. Excellent description lifted right off Ebay for same part! (missing paper gasket) 1957-64 Full Size & 57-66 Imperial "Autolite & Prestolite" Variable Speed Wiper Motor Gear Pkg.-NOS New Old Stock Variable Speed Wiper...

NOS plastic gear on metal hub PN 1879 598 for "Chrysler 57-65 wiper motor" as well as (listed) 57-64 variable speed wiper motors. Still in Mopar parts wrapper. stock pic but same new condition. Gasket is gone. $15 shipped

Big mutha...A/C package cars? clutch still firm. Only 3.5 tall. $60 plus shipping from 92780.

Holley 4010 square bore carb, 750 cfm vacuum secondary list 84011. All aluminum no bowl gaskets below fuel line. Annular boosters, Can change jets without draining fuel like a 4100. Comes with dual feed line and small Russel fuel filter. $75 plus shipping from So. Cal or free local pickup. On...

Crane, Crower, possibly Engle? Don't know. Older Solid body, solid lifter, captive roller bearing, B-RB-Hemi straight link bars some took a spin but the rollers are still good, used condition. Wanna try that $50 roller cam you impulse bought at the swap meet without blowing your slush fund? You...

I have a mismatched set of logs off a 65 273 A body. Correct 1964-5 driver side, 1972 passenger side of same 65 design. Needed for a V8 in a narrow A-body to clear steering and get proper flange/exit angle for stock Y pipe. I passed a stock build years ago and will not need them. Good...

<<SOLD>>> Bushed floaters, resized, balanced*. ARP bolts (2 are not: maybe 1 good Pioneer 180,000 psi and one marked D). *6 of 8 are 752g, other 2 are 754g and 748g (pair those up together) . All are same casting 3418645. Bought to use but bought press fit pistons instead. Not rusty, just...

AKA spark plug tubes...with good pliable seals $25 Slant Rockers on shaft with bolts $ 25 All plus ride or pick up So. Cal PayPal is preffered.

2 core TQ's for the price of one. First is a 6453S and other is a 9292. Both are core carbs, one is complete, 1 aint. Pics tell the story. Ill sell lot for $45 plus shipping from 92780. Ill estimate $30 for shipping but will refund any less. Hanging in garage for years, passing them on.

Older model with the progressive roller cam linkage. Missing both pump arms...and a rod clip? New shooters, Manual choke a little stiff. 30cc and 50cc pumps (bad). Needs some lube and probably need a gone through but I believe the gaskets are fine. Annular booster. Pics tell it all. If you see...

almost everything $5 or $10, shipping is on you. I always ship cheapest. Ill estimate shipping but itll probably be more than the part at these prices. Big stuff will be more expensive to ship naturally. SOLD>>>1.88/1.60 valve set, serviceable. plus spares $5 <<< B/RB double lower pulley cut...

List 84011-1 which is a 750 CFM 4010 aluminum carb. Love em or hate em, this one is pretty clean. Has annular boosters, square 75 jets and a 6.5 PV. with a .035 shooter. manual choke with Mopar throttle bracket. Comes with a small Russell inline filter and anodized/braided fuel line. I recommend...

I think this is an older Rollmaster billet seamless double roller timing chain that came with the Rolon blue chain. Later Rollmasters came with an IWIS chain. Has 9 way lower sprocket. Chain is tight when installed, maybe 1/4" deflection. Lower sprocket has some PO's installation marks on it and...

Well, its got purple paint on it but I've measured it 4 times and I come up with a .513 lift:(1.573 lobe - 1.231 base circle =.342 lift, X 1.5= .513 lift?) and nothing in the MP has that 'cept maybe the .509 with the valve lash? The lobes look ok, they all measure a hair of each other and its...

Chevy SB oil cooler unused kit - $10 + ride Chevy SB remote oil filter kit - $10 + ride 8 3/4 peg leg carrier with bearings, bare. - postage or pick up. small hydraulic control push/push cable (kickdown or throttle?) - $20 + ride everything from Socialist Cal. 92780 Ill be adding things as...

see new listing

not mine but a good deal if your looking for one. Plymouth 273 engine rebuilt MOPAR SMALL BLOCK

A friend has a dual webered (clifford 6=8 intake) shaved head slant with a Clifford header that he wants to sell (didnt build it-bought it with a car, going to Fitech V8), The intake and Red Line Webers ($1529) were coated to a chrome like finish. He is in So.Cal. He wants $600 for the whole...

2 sets of flexplate/flywheel bolts, unknown origin, 2 sizes: 3/4 head, 7/16 thread diameter, 1/2 thread length (6 pieces) 13/16 head, 1/2 thread diameter, 1/2 thread length (6 pieces) either set $12.50 shipped

I think this is for listed HP apps unless those are chrome, then I believe this may be for all 60-69 apps that have a oil/breather combo w/hose including C.A.P. Super clean (I cleaned it and threw it on the buffer to see if I could get it any brighter) $32 shipped in USA

Craigslist buddy has this for sale, whole lot for $120: 360 block, good heads, partial disassembled, Edel performer (sold) its in Costa Mesa, by UCI. Also has 67 era AFB. Tell 'em Steve sent you. I was interested in intake but found he had a buyer but told me about the other stuff...

craiglist ad, not mine but an interesting way to mount a motor on some frame rails...? $50 http://orangecounty.craigslist.org/bpo/4937233066.html

Never mounted Arrow Racing Mopar R block 9.0- 9.2 deck cast timing cover. Top bolts are ~5.557 wide, not wider LA/Magnum width. Takes STD water pump bolt pattern. Has pump cavity unlike $400 MP part in Jeggs catalog. Original erroneous LA post was lost in crash. $200 shipped

Decided to sell this overbuilt turbo and buy a larger Chinese junk turbo for a 273 project, off a Cummins 4BT motor, rebuilt with new kit installed, new bearings, rings, seals, deflector, etc. Everything but a new compressor wheel. It had very light contact when rebuilt so the clearance on the...

This is not mine. Somehow it was credited to me after I made a inquiry on it so as far as I know the units are still for sale unless the original poster (do a search) can chime in. I have never owned these.