Search results for query: *

Looking for an old pump to bolt to an old engine so I can test fit upper and lower pulleys on.

I need one stock hood spring. Just the spring for original steel hood. Thanks

Looking for 94-01 Reg cab short bed Dodge truck. 6 or 8 doesn’t matter. Auto trans. Preferably in the SE USA. Or may consider others. Thanks

Like title says pair of front TS lenses wanted for 65 Valiant.

I need one stock hood spring. Just the spring for original steel hood. Thanks

Looking for the choke blade, shaft and linkage pieces on both sides for a 1406 600 carb.

I’m building a 742 for a member and it has a Dana clutch style SG. It has one broken spider gear. I thought I would see if someone has one before I buy the whole internal kit. Thanks.

I’m looking for the anchor piece for the over center spring on a 67-76 A body clutch pedal. I added a picture to show you what it looks like. Thanks

So what is the chance of me finding a good front valance for my 1965 Valiant. I also need the hood latch vertical support.

I’m in need of one brake shield or I may buy a pair if I have too. I need the opposite of the one pictured. I don’t want to say left or right since the calipers can be front mounted or rear. Thanks for looking.

I’m helping a friend and another member rebuild/restore some clutch pedals and parts. I need a clutch pedal over center spring. A master cylinder push rod. I need a V8 bell crank ( this one is Mickey moused beyond belief) I need the bell crank ball on the bell housing side. I need two sets of...

If someone has a bunch of these little white steering column plastic pieces or know where to buy them reasonably I would appreciate it. I have some I know but I can’t find them. This is for a 72 Duster column but I believe they are all the same for many years. Thanks in advance.

As tittle says, I need good floor pans for the drivers front and rear on a 66 Dart 2dr Post.

I am missing 2 of the narrower plates that the bolts go thru to retain the rocker arm shaft. And if possible the two different measurement lengths of the bolts that retain the shafts.

I have a Mr Gasket V-gate shifter that I need a set of three shift rods and levers for a A-body 833 4 speed. Also need the shifter mount for a 833 part number S1-9033. The pattern on the piece of wood is the one I need. I have a mount S1-9026 which is for a Ford top loader 4 speed which I will...

Helping a friend out, He has a 67 Dart with a 273. Wants a little more get up and go. Looking for a 340 or a 360 that is a good running engine or a good core. Closer to Fl. the better.

I'm in need of 3 of the cross bars that the 4 small spider gears ride on. I know Dr Diff sell the complete kit. But all I need are the bars they ride on. I have a couple of SG's that they are broke in half. Maybe someone has a few?

I need a set of 8 intake only 1.5 or 1.6 Aluminum rockers for the Stage VI 5249579 Max Wedge heads. They take a special .450-.465 offset intake rocker.

I need three of the special 1/4" shoulder bolts that hold the internal horn button plate in place. Can't find mine. Thanks in advance.

Looking for a passenger side headlight bezel for a 72 Dart. In good shape. Thanks

I thought wrong in my previous post. I don't need a 73, I need a #74 Air bleed. Or where I can buy just one. Everywhere I look they sell them in lots of 10!

Just bought a used 80496 950 HP Holley and for some reason it had a odd size idle air bleed. I need on #73 air bleed. Thanks------------------Roy

I need a right side or Passenger A-Pillar trim for my 68 Barracuda fastback. Prefer black but any color will do as long as the surface is not all burnt up from the sun.

Thought I would ask on here before I order one from TTI. I need one for a 68 Barracuda SB with TTI 340 Step headers. Maybe some mufflers too, depends on what you have. I don't think I have room for tail pipes so with or without will work. Thanks

Thought I would ask on here before I order one from TTI. I need one for a 68 Barracuda SB with TTI 340 Step headers. Maybe some mufflers too, depends on what you have. I don't think I have room for tail pipes so with or without will work. Thanks

Looking for a slip yoke for a 727 trans with 1350 series u- joint.

Before I order a bunch of AN fittings from Summit I figured I'd see if maybe a member here has fittings for sale. I'm in need of 6 and 8 AN 45 degree ,90 degree,8 An120 degree, 6 An bulkhead fittings with nuts. Or let me know what you have.-----Thanks

Looking for a new one or like new convertor for my CRT new 727-4 transmission I have for the Barracuda. I'd like a 9 1/2" or 10" 3-3500 stall. Maybe someone bought one they didn't use they need to get rid of? For a 68 or newer. Thanks

Tittle says it all. I want to mount my Clay Smith Cams wood pecker tag on the front of my 68 Barracuda.

I have the new bezels, I'm looking for the antenna itself. Doesn't have to be a working one, I won't have a radio in it. Ijust need the part the bezel screws on to. What I'm after is plugging the hole. Thanks