Search results for query: *

Hello all, I would like to know if anyone on here has some OEM NOS key blanks for my 69 Barracuda. I can find them on Ebay but wanted to buy from one of you all if you have them. Please let me know and thank you! Tom Hand

For a pal of mine that used to have one, I'd like to get a factory sales brochure for a 1970 Dart. I know some of the professional literature guys might have them but I'd like to find if any of the A-Body folks had some they wanted to sell. Anything related to a 70 Dart, literature wise, would...

Looking for a decent 6125S AVS from a 1971 383. i figured some of our A-Body pals might have one lying around even though this is from a C-body. Thank you. Tom

Anyone have one of the Quadrajets they stuck on the 318 engines in Diplomats and trucks around 84 through 87 or so? I have a pal building an old van that would like to have one. Let me know what you might have around. He also needs some of the throttle pressure linkage that goes with it. Thank...

I need a factory shop manual, preferably for a truck from 1984 and later that has the variations of the 904 transmission as well as the 727. What might anyone have? Thank you much! Tom Hand

I have a bare set of 69 340 heads that needs new valves and springs and retainers. What might you all have lying around? Thank you, Tom, KC, MO area 64086

I am looking for the base for the unsilenced air cleaners used on 340, 383, and 440 cars. No need for the top, just need a decent base. Condition is not that important as I can fix most anything. I am in 64086 zip code. Let me know what you might have lying around you need to get rid of...

Greetings, A pal of mine broke his 1973 727 TF extension housing and governor assembly. Any one got one lying around? Anything 71 and later will be OK (727) and governor wise, the aluminum governor body needs to be a mid 70s or so. I think the primary weight on this one is ok. but it tossed...

I know this is not a Fifth Avenue forum but thought I'd ask if anyone has the shift linkage washers and clips and bushing that goes on the driver's side of the manual shift linage on an 83 Fifth Avenue. An elderly customer has one that rattles around because all the linkage washers and clips are...

Howdy, I need a 727 torque converter core. It needs to be a 10.75"or 11"one like any old 318 or 340 or 383 used. Anyone close to kc have one to get rid of? Thank you all. Tom

Hi folks, I need six good bumper bolts, original, for my 69 Fastback, that I can use to remount my chrome bumpers. I can polish them and small dents or scratches will not bother me. What might you all have for sale? Thank you! Tom

Folks, I am looking for a set of good heads for a relative's 87 dodge 318 truck. It needs to keep all the low end power it has but it can use bit more mid and top. Love to find a good set of the limited P4452748 MOPAR Performance heads but a good set of 302 casting heads should work well too...

Greetings, I am looking for some good, used or new, American-made bolts for my 1969 Barracuda bumpers. They will be refinished but I need some good ones, not rusty old scruffy ones like I have in my "collection". I will need 12 total. What might you have? Thank you! Tom

Hello , I am helping a good friend Brian T with his Torqueflite and we need the following parts, all for a 71 and later 727. 1. Four pinion planet, front and rear 2. A 3.8 or 4.2 KD servo lever 3. A four clutch forward retainer (drum). I can get them from my normal parts supplier but...

I am helping with a 65 Dart GT conv. and am looking for the external molding trim and a good finish panel for the rear. Anyone have any spares? Thanks so much, Tom

Greetings, I need a mid 80s 318 four barrel intake to match a 1985 Q-jet that is going on a 1987 318 Dodge truck.The truck runs very poorly and it appears to be the two barrel Holley. If you do not have the cast iron stock intake, anyone have a good Holley 2 barrel from this era, for cheap...

Since you guys and gals always come through, thought I might ask you. A pal needs stock mirrors for his 1970 dodge truck. Anyone have a set? Thank you, Tom Hand

Howdy, anyone have an old baseplate from a 68-69 340-383-440 air cleaner you are dying to get rid of? I need one that I can cut about 0.500" out of so my stock air cleaner will clear my new "OEM" hood pad. [email protected] if you have one to part with. Any shape is a-ok. thank you, Tom