Search results for query: *

Wanna swap out my long tube headers. If you have one or both manifolds for sale, LMK condition, price and zip code. Thanks FABO nation, Dave

My car (original 10" front drum brakes) currently has a Wilwood 140-2713 front drag brake conversion, 4.5" BBP. The Wilwood rotor hub diameter is 81.5 mm (3.21 inch) which won't allow me to run OEM steel rallye wheels (2.75" center bore) as I would like to do. Also, the Wilwood drilled/slotted...

Yes, my preference is to stay with the BBP, and my driving is between mild amd spirited and definitely not crazy. I haven’t ruled out going back to drums in all 4 corners - but is it possible to redrill Duster SBP 10” front drums/hubs to BBP?

Valiant - yes, at Wilwood tech line’s suggestion, the previous owner bought their “street” pads but they made no difference in reducing the noise.

Tony, yes, my Wilwood discs are the drilled/slotted ones. The previous owner even bought Wilwood’s “street” pads at their tech line’s suggestion but they made no difference in reducing the noise.

Thanks Demon. Swapping over to 73+ BBP discs would require me to also swap out my 10" drum brake spindles for 73+ disc brake spindles, correct?

My car currently has a Wilwood 140-2713 front drag disc brake conversion kit, 4.5" big bolt pattern, that uses my existing OEM 10" drum brake spindles. The Wilwood drag disc brakes ares noisy and makes a loud "shhhhhhh" sound when braking (I've been told by the Wilwood tech line that this sound...

Might end up fabricating one out of galvanized sheet metal, just enough to cover that exposed area, with a couple of notches along the bottom edge for drainage (you never know when you run into wet roads).

Right OMM - just an example. Ebay has some small block shields for 727s, with a big cutout at the bottom to access the torque converter drain plug . . . which to me defeats the purpose of a shield?

My car was formerly a race car, which I suspect is the reason why there is no dust shield on the lower half of the bellhousing - see attached pix of under my car and of an example dust shield. My car is strictly for street use now, and my concern is road debris getting into the bellhousing...

Thanks FABO nation!

Between the light switch and the speedometer, there is a 5/8" diameter round chrome bezel, with a very thin threaded rod protruding out of it about a half inch. As far as I can tell, the rod does not turn left or right, but does pull out/push in about 1/8". I didn't see any reference to this...

I take that back. Hawaii is USPS Zone 8, USPS Ground Advantage Retail for parcels 4 oz or less to Xone 8 is $5.55

Doesn’t need to be Priority Mail. USPS regular or ground is fine. Bubble mailer works, postage should be less than $5.

It's for my driver, so a key is not needed as long as lock is open and operable. Not gonna pay $40-$75 for a repop with key. Thanks.

Beautiful! Will do the Velcro!

Great! Thanks S-C!

Tx!

Tx Dart. I did a search earlier but my search terms “console glue remove” didn’t turn up any useful results, and so my request for info to FABO nation. I’ll try other search terms, tx.

I'm reconditioning a center console and would like to know what others have done to safely remove the old carpet adhesive. Thanks! Dave

Hiduster - I'm on Oahu. I'll be adding a center console/shifter to a '71 Duster H-code that is arriving from Oakland later this week (it currently has a Cheetah SCS shifter). If you don't mind, I'd like to know how your installation went and if you have any helpful tips to offer me. Mahalo!

Ok, thanks! I should be good with the parts I've assembled.

Newbie here so please pardon the questions. I recently bought a '71 H-code with 727 trans, and it has a Cheetah SCS floor shifter/console that I plan to replace with an OEM floor shifter and center console. I've already purchased the "coffin" OEM center console with mounting brackets and OEM...

Thanks Sinister. blewbyu - Thanks for responding to my hood hinges wanted post with your pix. RattyBarracuda can have them, I was able to find a pair of hinges locally. FABO nation - I'm a newbie here. I got leapfrogged on the seller's follow-up reply to my parts wanted post. Should I have...

Thanks!

Before I go through the exercise of making one, does anyone have a pattern or template for the center console carpet? Thanks FABO!

Thanks Dave. I now have the mounting brackets. What's your asking price on the shifter and the linkage? Thanks, Dave

727

727

Looking for a used set of center console floor mounting brackets - the long "M" bracket, the shifter bracket and the "U" bracket - see all three brackets on floor hump in the attached photo. Not paying crazy reproduction price. I'm checking the parts and parts cars forums here on FABO. See...