Search results for query: *

thanks, appears that the speedometer gear was improperly clocked, I did not expect it to be bad when I took it apart so I did not look closely at how it was indexed... What about the wear on the internal boss that the tip of the gear runs on,,,

The top speedometer gear assembly is the one removed from this F body a833 OD transmission. the second speedometer gear is in the photo for comparison. Question(s) 1) are speedometer gears used in the F_J_M body vehicles that also have the plastic main body shaped that way, or is this gear...

Using an aluminum case a833 OD transmission out of a 1975 F body. I worked with Brewers Transmissions for the Hurst Shifter, shift rods and bushings and clips. The 1-2 and reverse rods are Mopar A body the 3-4 rod is a F body OD part. Interesting thing about this transmission is it is stamped as...

I had always planned at some point in time to convert the 68 Baracuda to a 4 speed car. When I put the car together years ago I put in the pedals, 4 speed hump and carpet set. Some time ago I had an adapter plate made that mates a SBM bell to a slant, so that is part of the project also. The SBM...

A note of related information,, I called Brewers Transmission to inquire about a rebuild of the A body a833 that I have and they said they are not accepting any rebuilds until they get caught up on the stock they have on hand, and they have enough to last an entire year. Brewers was a good...

Hello, I have an A&A race built 904 behind the slant in the 68 Barracuda. That combo was fine when it was a drag race car, however now that the car is a rowdy street driver I plan to install an aluminum case a833 OD transmission. Using an adapter plate, a SBM QT housing and billet 130 tooth...

Rusty, just wanted to mention that I have been daily driving the long rod slant that I built, has about 800 miles on the motor and it is doing fine. Checked the cranking compression last week and got 180-180-180-180-185-185 I used the KB Hypereutectic pistons, K1 rods, my cam is [email protected]

I saw on a posting discussing the Skosh Chart that the camber settings for Max.perf.street should be -.75 to -1.0 degrees similar for Track/auto-X, that should be -2.0 to -3.0 degrees A positive Camber with the top of the front tires outside the bottom of the front tires would be unusual.

The 68 Barracuda has been an ongoing project since about 2016. Everything on the front and rear suspension has been replaced or rebuilt: new ball joints, C body tie rod ends, reinforced LCA, Moog problem solver bushings in the UCA’s, seam welded and reinforced K frame,,,

Maybe it was mentioned but I did not see it,,,, and having the motor out will make this easier, dial in the bell housing with the bell mounted and torqued to the block. Manual transmissions are much more sensitive to alignment than automatic transmission are. There are several sources for offset...

Took the 68 Barracuda to a local shop for front end alignment. The shop, Grilliot Alignment in Darke County OH was highly recommended by every local car enthusiast that I spoke with. They have a tech that does all the classic cars and he was more than willing to listen to the alignment specs...

Thanks, good advice.

When measuring then setting ride height, I understand about loosening the pivot nuts, but what about disconnecting the front sway bay? And then on the actual alignment, should the front sway bar be loose or attached? Thanks

The unknown grill head light trim pieces are no longer available. The hood louvers and 120 mph speedo are sold

Made room in the in box

For sale: * Outside remote control mirrors, driver quality $10.00 each + shipping * Set of 67 Barracuda hood louvers Driver quality $10.00 for the set + shipping Hood louvers SOLD * Two head light grill trim, look to both be the same side. Not sure of application, see photo. $10.00 for the...

you can re drill the flywheel bolt pattern. the bigger difference is the slant uses a 122 tooth flywheel the 318 uses a 130 tooth flywheel. the 318 flywheel is a bigger diameter, the slant flywheel will not mesh with the starter in the 318 flywheel housing.

From the '68 Barracuda * bumper jack base * ratchet - lift mechanism * tire iron shipped anywhere in the lower 48 states $75.00 pay pal or MO if pay pal please cover the fee thanks

pending

Two 14 wheels BBP, have older tires mounted on them. $5.00 each or best offer with local pick up in Indy.

Truck shock plates, See photo and the thread that is linked. ID these shock plates If you can use them, pay shipping and the pay pal fee and they are yours. They should fit in a medium flat rate USPS box

That is a match, they are truck shock plates. The U bolts that were with them must be for a different application. Thanks to All for the help.

These shock plates are larger than the shock plates that I have on the 8.75 on the 68 Barracuda. The spacing on the U bolts is the same. I am going to be putting these up for sale and I don’t want to steer someone wrong on the application. 1) Are these truck or C body or maybe B body 8.75 shock...

The 74 Dart lights are sold The 73 Dart lights are sold

great, I made room in my in box

Sold

New Old Stock Mopar, never installed. For a 742 differential. 2.76 ratio Will ship in a medium usps flat rate box. I have the original Mopar box. It would cost more to ship in that. If the buyer wants the oe packaging I will fold and fit it in the medium flat rate box. $15.00 + 17.10 = $32.10...

OE front turn signal lenses from the 1968 Barracuda. Driver condition. Will ship in a small USPS flat rate box. $25.00 shipped Pay Pal or MO

New, never installed, not sure why I even have it More Information for STANDARD MOTOR PRODUCTS EGV490 $25.00 shipped in a medium flat rate box Said to fit v6 and v8 88 to 92 Dodge pick up trucks, vans check the rock auto listing for a complete list of applicatons

Slant Six 1972 Duster K Frame. I recently shipped one of these from Indianapolis to central Florida for $225.00 including the box. Shipped via Fed Ex. If you are about the same distance as Indy to FL shipping will be similar. If you are farther away shipping will be more. If you are a lot...