Search results for query: *

AEM Electronics 50-1009 AEM Electronics High-Flow External Electric Fuel Pumps | Summit Racing i'm looking for a 400lph inline pump that wont break the bank . Any reviews on this pump . thanks .

ok its a 418 sb with a air gap intake cam is around 250@50 . I squared my transfer slots up and now it wants to idle at 3000, i always had problems with this carb wanting to idle fast . my timing is set up 26 and 35 as tuned on the dyno . it will idle down with the t slots shut off .

http://www.summitracing.com/int/parts/hsp-204014/overview/ seems like good stuff and a good price anyone use it ?

I gotta solder a nipple in a used gas tank I was thinking of putting a hose in it hooked to a exhaust of a car and filling it with carbon monoxide what do you think?

can someone point me in the right direction in looking for a fuel sending unit 1/2 inch fuel pickup and a 3/8 return for a 70 duster. I was going to soldier a return in my own but it is stainless steel it dosent soldier well

just done a tune up on my 416. rpm heads air gap intake 10.03- 1 compression. cam is 543 lift dur at 50 is 256 lobe sep is 110 and 106.1. msd 6al and a msd dist.the carb is a 950hp primary jets are76 and sec jets are 75. air bleeds are 74 idle and 32 primary.the car is working good I just want...

I just got the walbro pump and it is rated at 60psi to replace the aeromotive that just died is it all right to use this with a 950 holly I have a good regulator .and will I need to reset the fuel pressure at the regulator im not sure what the aeromotive psi was it was the big pump. I have no...

can anyone help me out with some tq numbers x496 2643 2699 4287 065 tq 93875 can any one tell what it is thanks