Search results for query: *

Ok first of all yes I searched the forum and found some information, but this situation is unique. background: 1968 dodge dart with a 440/727 New M&H wiring harness in the engine bay Original Harness under dash in very nice shape Battery relocated to the trunk Brand new Battery Brand new...

I finally finished wiring up the car using this wiring Diagram. My problem is, the car seems to be completely dead with no power going anywhere. Before I get out my meter and start tracing, I thought I would ask you guys what you would check, and what could be suspect? I grounded the battery to...

I did a search and looked up most threads, but still can't seem to find a definite answer. I am doing a battery relocation to the trunk, without the ford solenoid. I know it was suggested that adding a fuse on the positive side, using 0/1 guage wire would help if it ever chaffed through and...

Ok well I finally have a working gas gauge. It was displaying the usual IVR symptoms, worked sometimes, fluctuated readings, etc. Got a Demon IVR setup, put it in along with the modified fuel gauge, and now it works like a charm! no more topping off every time i want to drive it now. Thanks...

Ok first I want to say I searched and I could not find what I was looking for. I would like to put new spark plugs in my barracuda. I pulled one out to see what was in it, and it has champion rj9yc plugs (the 5/8 hex head) in it. It is a 360 with J heads, comp 268 cam, holley 750 carb, air gap...

Ok it seems simple enough, I got all new wiring harnesses from year one, dash wiring, engine harnesses, etc. When connecting to the new bulkhead, the engine harnesses are absolutely impossible to get to snap into place, like something is preventing it from going in, but all blade connectors are...

Here is a weird question. I went outside to work on my car(1967 barracuda) after driving home from work, and i noticed the headlights were on. the headlight switch was not on nor were the keys in it. I figure the headlight switch might of gone out, I pulled the switch out disconnected it and...

Right now on my car I have an MSD 6AL, blaster 2 coil, and the MSD billet distributor with no vacuum advance. I would like to change it out to the MSD digital E-Curve distributor, it has vacuum advance and this is mainly a street car that will see the track every couple weeks.The previous owner...