Search results for query: drivers side manifold

YR question regarding the compression if using the TRW L2322. I am wondering if my compression is indeed 10.5-10.8:1. Wouldnt explain the static compression I measured. I verified my static cylinder compression measurements with another gauge type All are "high" `200. Below I found this info...

Dave, I had to run the filter adapter and use the 273 manifolds on my Magnum. I also used the stock cross over pipe off the pass side manifold. Both pipes run back on the drivers side until they get past the transmission cross member then it crosses over and comes down the pass side. Not much...

You got that right . In1968 I bought a new 68 form S 383 fastback from Tink Wilkersons chry/ply. in Tulsa. The sheet on the window stated it had a 383 roadrunner engine , 330h.p. , only one other person I heard of had the same thing . I don't remember, but some where I read that it was rated 5...

this is on an e-body for the past 18 months or so and work great. not a b body but about the same engine compartment size. The third picture is of the passenger side Jeep Grand Cherokee manifold. Good afternoon Gilbert, a little update info for you on your manifolds and "E" body fitment. The...

I also bought a 1998 Magnum 5.9L engine and just got it back from the machine shop. I’ve had the stock heads rebuilt with Hughes Engines spring set to make the stock heads work with the custom grind Bullet Racing camshaft. I’ve gasket matched the heads for a little better flow and bought one of...

Casting # 2465857 in great condition. $75 plus shipping. PP or USPS money order . Located in Oak Harbor, Wa. 98277.Thanks for looking .

picture is clear and says a thousand words.thanks. Now I have figure out if I have the correct drivers side exhaust manifold. The battery cable is very close

If it could/would work I would have been machining and selling right now.........but I don't think there's any way it can be done. I actually tried to install a JGC on my '69 Barracuda (318). The exhaust outlet actually hits against the starter before you can even get a bolt into the head. It...

I think the above reply of $15000 or so is probably pretty close, around here in SoCalif under $10000 don't usually have an engine at all and are basically rusty junk. Prices here are crazy. However I think I'm going to pass on this car, my car (streetrod) is upwards of $28000 to $30000 although...

Thanks for the info Mark, first year car pros and cons.

yes for the passenger side i used the jeep grand cherokee exhaust manifold exit hole it 2 1/8. its cause the muffler guy i go to said, he cant make the driver side 2.25 he would have to start at 1 3/4inch then to 2inch then to 2.25 like the rest of my exhaust system . and i said yeahhhhhhhhhh...

Gotcha yeah I'm just going to do the flex pipe around as close as I can get with an angle piece welded to the manifold to get it above the steering linkage and then little piece of flex pipe and go to 2 and 1/4 and just run that underneath the crossmember won't see it the cars going to be high...

I’ve got one in phx, pm if interested. Jake

Yes, and what people also don't realize is, those manifolds are different from 67-69 with 69 being the best flowing. They are his manifolds. He can ask what he damn well wants. It's anyone else's right to not buy them. I remember a magazine doing a test on an original 69 440 car with those very...

BRING ALL THE IMPORTANT STUFF UP TO THE PRESENT PAGE Expand and watch video V V V V V V V V V V :thumbsup: FLOATS ARE ACTUALLY SLIGHTLY HIGH IN THE BIG DEMON SITE GLASS NO VAC LEAKS, AND NO BRAKE BOOST TO COMPLICATE THING EITHER. I'm exited, think this will be a vary interesting...

Intake is in nice shape- casting number in picture. No EGR. $125.00/offer plus shipping Drivers side manifold- professionally fixed on inside. Casting number in picture, no cracks that I can see. $150.00/offer plus shipping Happy to answer any questions. Thank You.

Intake is a 1972. Drivers side exhaust manifold is 1973.

Really late to the game here but the smallblock 360 in my Duster has unknowingly (by my own mistake) been running off of manifold not timed. This thread had me check and sure enough it was on the drivers side port on a Carter 600 (Edelbrock) instead of the timed port where Carter/Edelbrock say...

68-70 340 hi-po drivers side exhaust manifold. no cracks or damage, no heavy pitting. in great shape. price is $300 shipped in lower 48 states. PM here, or call/text 2708602323. thanks.