Search results for query: *

A-833 input shaft that's worn can be used for an alignment tool $10 + Shipping (which is probably more than $10) or pickup in 48362

2 different factory hurst shifter mechanisms (no link rods) for A-833 (bayonet type) 1 is in good shape and works well $65 + Shipping 1 needs rebuilt but is all there SOLD Handle with "OD" ball, pretty decent chrome, bayonet type SOLD You can also pick up in 48362

67-76 manual transmission linkage rod connecting the pedal to the Z-bar. Was new about 11k miles ago, boot has a tear but will include. $30 + Shipping or pickup in 48362

Special TTI headers Z-bar that has more space to not rub on the headers, '67-'71 style pivot ball bracket for the bellhousing, and pivot ball for the frame side. All in good shape. $85 + Shipping or pickup in 48362

73-76 style spool mount (polyurethane) and crossmember. Nice clean one with bolts. Fits 67-72 as well as an upgrade over the likely to snap biscuit type. $50 + Shipping or pickup in 48362

Clutch fork and boot, these were new 15 years ago and maybe have 11k miles on them. $40+ Shipping or pickup in 48362

Two stock style diaphram clutches and pressure plates $10 EA if you pickup, $35 EA if I have to ship them. Also will throw in a centerforce dual friction disk if you want it. 48362.

Stock small block bellhousing cover plates. Crack at the starter hole and broken tab on the front plate. I believe these are the earlier type because the bottom plate fit the "734" bellhousing but the front plate had a bolt that didn't line up. $40 + Shipping or pickup in 48362

Mr Gasket A-833 A/F Body short throw shifter with brackets and boot. Missing adjuster nut at shifter side, but they are the same as a stock shifter. $75+ Shipping or pickup in 48362

3515734 Bellhousing to hook a small block to A-833 with good pivot bracket $100 + Shipping or Pickup in 48362

Quicktime bell housing for small block, has been modified with larger hole for the clutch fork and clutch pivot. Comes with block plate. Will save your feet if your clutch explodes. Have rings for all size bearing retainers included. $200 + Shipping or pick up in 48362

-2.66:1 4-speed rebuilt by brewer's in 2012, about 6000 miles on it, seeps some from side cover but works great. Converted my car to a T56 Magnum. -Factory hurst shifter with handle that clears bench seat, driver quality chrome, Billet Shifter mount -Polyurethane Spool mount and 73-76...

For sale: Federal Power steering pump+ Brackets for 70-72 A-body with a small block engine, with a hose for a 70 Duster. This was used on my personal car until I swapped to a Saginaw pump when I installed Hydroboost. Pump was reman in 2013, fresh fluid through the entire system at that time...

Edelbrock performer RPM Air Gap intake - painted Chrysler blue. This is from my 340 - used until I converted to multi-port EFI. Excellent condition. Has correct bypass hose fitting so your bypass hose will actually fit. $220+shipping

Quickfuel Annual Discharge Carb. SS-750-AN. 750 billet double pumper with annular boosters. I used this on my 340 before I switched to EFI. Carb ran great. Includes AED dual feed input piping and filter as shown. The ported vacuum port on the metering block was broken, but it's been epoxied shut...

Carter 120gph Mechanical fuel pump + holley regulator + braided line. Used for about 2000 miles. Bought new in 2013. Set up for 5/16 input and -6 outlets. $75+shipping. Looks like this when installed:

I have a set of summit racing chrome moly pushrods in 7.650" length. These are the pushrods you need for running magnum heads with stock rockers and a flat tappet cam. $50+shipping. SOLD SOLD SOLD

1 set of lower control arms with sway bar tabs and a stock sway bar from a 67-72 model. Just removed from my 70 Duster. The bushings are just in OK shape, I'd probably replace them. Arms themselves are quite nice. SOLD

I have a used set of 0.92 torsion bars that were removed from my Duster this fall in favor of some 1.06's. These are the Mopar Performance ones - they were made in the early 2000's. I never had any issues with them - and they are in great shape still. They will need the paint touched up to be...

Holley 600cfm Carb #6619-1. Needs power valve and probably a kit. Ran briefly about 8 years ago. Has an electric choke kit on it, but also comes with the manual choke. Has quick change secondary cover. $35+Shipping

Holley 600cfm Vacuum Secondary Electric Choke Carb #80457-3. Made in 2003. Has quick change secondary cover and comes with the spring set. Also comes with Summit fuel filter (pictured) with AN fitting and pressure gauge. Worked well on my 360 for several years. Needs a kit and power valve (has...

MSD Soft Touch Rev Control #8728 + 5000 RPM Pill set. This will work with the factory electronic ignition and is currently set up this way. Pigtail has weatherpack connector (both sides). Simply connect power, ground, and both sides of the coil and it will cut spark at the limit set by the pill...

Carter 9058S Thermoquad. Mid 70's application. Believe this one was for a big block. $25+ Shipping

Edelbrock RPM Air Gap for Magnum style cylinder heads PN 7577. Includes fittings for waterpump, bypass hose, MP Chrome water neck (doesn't leak), and a 180 Stant Superstat. $190+ Shipping

For Sale: ~1972 A-body 22" Radiator with matching fan shroud for small block '70-up, PN 3574636. I just removed it from my car this summer when I installed a higher performance engine. This radiator was able to keep my low compression 360 cool and did not leak. The shroud was cracked but...

Mopar M1 LA Single Plane intake manifold. Was made in 1997. Freshly sandblasted. Excellent condition. $150 Shipping Extra.

KB 1267 +0.030" Cast 340 Pistons on 2899496 full floating 340 rods. $180. These were in a 1969 340. The pistons were made in 1988 and everything is in good shape. I doubt there are that many miles on these parts Will sell pistons and rods seperately for $100 each Shipping extra

-M1 single intake for stock LA small block heads, nice condition, older style that takes 60's-70's thermostat: $150 -Milodon gear drive, used: SOLD -Bronze gear oil pump drive, used: SOLD -Stock rocker arms from a 340 w/shafts, clean: $25 -Cast iron 90 degree oil filter adapter: $40 -Stock...

Edelbrock Thunder Series AVS 800cfm Electric Choke + calibration kit + accelerator pump squirters + dual feed fuel line. Nice shape. To buy this new would be around $550 Runs nice, just wasn't right for my application (carb is too big for my combo). $350 obo + shipping from 48336.

-1972 340 Trap Door air cleaner, nice shape $75 Sale Pending -Mid 90's magnum heads...valves & springs not installed, low miles, light surface rust. Have all parts except keepers $60 -"J" heads, 915 casting, 2.02/1.60 valves, nice shape, mopar red springs, bronze valve guides, last rebuilt in...