Search results for query: *

It's all good, I wasn't offended :thumbsup:. I'm usually inclined to things right/ extra, but it gets out of hand sometimes.

Are u mocking me? Thats OK as they are actually Australian EQ. Am I using the old lifters now and getting new intake valves or just getting new exhaust valves since they are pitted? What is it that makes Magnum valves junk anyway?

The seats on stock intake valves look very good after I cleaned them up, the exhaust valves are a little pitted, but I thought they could be cleaned up better with the valve job. The heads don't look used. I got them from a guy, who got them with a project car, but went with some aluminum heads...

Thanks, I kinda knew the answer, but was just double checking. Now I don't have to screw around cleaning them. If the heads are "decked" and using a thinner head gasket to raise compression some, are longer push rod in play too? Thanks

I'm doing a 5.2 motor. It is a 2000 and has 195k on it and ran quite good in my Ram van that unfortunately had frame rusted beyond repair. The block shows no wear...no ridge and still has visible cross hatching. The heads and exhaust manifolds were rusted to $hit on the outside, with busted...

$80

Thanks for your input

Good deal

Last chance! Come and get it

I'll give it another week and if there's no interest it will be scrapped.

I have 4 14x5.5 SBP wheels they have tires that hold air. Photos are of 1 wheel, the others are in similar condition $35 each Pickup 08244 Thanks for looking

I have 9" SBP rear drum brake set. Complete with drums, good hardware and newer shoes. $100 or BO Pickup 08244 Will ship on your dime Thanks for looking

I have a 7.25 rear, I don't know the ratio, but it worked fine behind Slant 6/904 in a 72 Demon. It could use a cover gasket and pinion seal. It is missing the brake lines and E brake cables. Pickup 08244 $100 Would probably deliver if close by for full price offer, rather than scrap it, which I...

They are not Mopar. I believe those are VW or Subaru bucket seats and tracks. I have them in my 69 Roadrunner and 70 Duster. I reinforced the floor, then made some plates, brackets and spacers to make them work...quite well. Very sturdy and comfortable.

I can't find a size or part #, but, measuring them I feel they are 5.5 wide. I'm going to figure the 13" wheel to have no value and use it as a base for my "portable" bench grinder stand. Currently it's mounted to my "bench" and is taking up space, not to mention that it throws debris everywhere...

Slant 6

They came off 72 Demon and are not rusty and painted. I'll look at the size and get some pictures tomorrow. I have 1-13" and 4 -14's

Are these wheels worth anything or even desired.

Cleaned up some valves from my old Magnum heads for my newly for my newly acquired old style EQ heads. Replaced the fuel filter and adjusted the carb on my Roadrunner and went for a test drive, with the recent temperature change which really wasn't that much, it started running a little...

I replaced the parking brake cable equalizer on my van. As one who never uses them, I recently came to reminded of just how they are important in an emergency braking situation when it didn't work. Fortunately, a crisis was averted and I'll never take them for granted again.

Yes, I've heard of them and another shop nearby, which I've dealt with before. Not saying anything negative but, I'm asking here for a shop that elicits a more positive response.

I am looking for decent decent machine shop recommendations in the South Jersey/Philadelphia area. Thanks

Do I need a core?

Are you just looking for the nylon rollers? I got some by using this part # from Classic Industries in a Google search and found them that snap on that ball...off Ebay, I think

I have some misc stuff that came with a car I bought. I don't need or want them Maybe you do? $39.99 OBO 08244

What position are they for?

I had some but misplaced them. I'm putting together some heads and need rockers. Stock will be fine, but if you have some aftermarket reasonably priced, I would consider them. Whichever, would need to come with the correct hardware. Thanks

4$ vavle spring compressor Got the idea off of YouTube. It could use some refining, but it works

Works on 5.2 Magnum?

Made a neat little valve spring compressor from a $4 HF C clamp and some scraps to harvest the valves for another set of heads. Replaced the worn out 7260/727 driveshaft yoke, with a new 7290 from Doctor Diff on my 70 Duster. Then I finished the morning putting some new side markers on my 74...