Search results for query: *

I am looking for four 15" LBP steel wheels that will take 9" poverty caps for my wheel conversion. 4" backspace X 6" or 7" wide would be optimal but I could take a mix of 6" for the front and 7" for the back.

I installed a disc/drum MC on my 67 Barracuda and now the actuator rod between the pedal and MC is too short. I think I need a later model year rod.

My friend is seriously looking for a driver quality Challenger convertible. Drivetrain unimportant but must be a complete and driving car. The closer to Washington State, the better.

Somehow my hood latch striker went missing on final assembly. Needing one badly and fast for a 67 Barracuda. Help:-)

I want hi-back latching seats for my 67 Barracuda. It looks like I need pre-72 A-body seats to get them to fit. I will recover as needed to match my interior. Looking for a set. Thanks for looking----DR------------:-)

I need the lower right 1/2 of 68-69 notch rear glass SS trimmer to complete a set I have. I know it is a lot to ask but you never know, just hoping someone has something-------DR

I need a fan shroud for a stock 67 22" radiator, 273 engine. Car has a 17" clutch fan and stock mounting holes are intact. New or used ok.

Need power steering pump pully for 1967 Barracuda 273 without air. Single groove, 5" OD, Press fit-no keyway, no back side arbor stickout. Would like nice straight one to replace the one ACardone damaged. I would buy complete pump if it would be easier for you. Thanks for looking----DesertRat

I am changing my 2V 273-904 to a 4V-904 and will be needing the proper kickdown linkage for the 4V version. I am located @ 98837. TIA---DR:coffee2:

I would like to find a Carter #4295S carburator as complete as possible. Rebuildable core works for me or nice completed one as well. Can't be priced too close to new. Thanks, DR:coffee2:

Hi all, I am looking for the lower only 68 rear notchback SS windshield trimmer. I bought an incomplete set from a member a while back and will soon be ready to install my rear glass. I am well aware I am looking for the bigfoot of trim, one piece and all, but I thought I would put it out there...

Well it appears I left my fuel filler tube in my organic cleaning tank for 2 or 3 years and it is doubtful if I can save it. Looking for one in good shape or where to buy new for 67 Notch. Checked Year One, RT Specialties and Laysons and i am 0 for 3. let me know------:pale:

Now that I am working on my car again I am trying to gather the missing parts I need. I have a partial set of 68 notch back glass trim but I am short the two pieces that go along the bottom of the window. Any help is appreciated, including a bargain or trade for a full set of back trim. Thanks, DR

I have decided after buying all I need to reinstall 67 glass gaskets and trim to change to 68 glass gaskets, clips and SS trim. Kind of goes along with mu policy of buying everything twice for all my builds:-( I have everything I need except the lower rear glass trimmers for a 68 notch. Any help...

I am moving along with my body and paint. I dissassembles the doors for body and paint and there a million little parts. Can anyone direct me where to purchase an assembly manual for a 67 Barracuda. I have the shop manual already but I need the one that goes into more detail. Any advice much...

Hey Motorheads! I am in need of a passenger side exhaust manifold for a 1974 360 engine, the casting number is #3418628. Happy to buy it shipped UPS if available. Thanks for reading! Rat

Looking to buy a 2V intake manifold for a 74 360 engine. Please PM if you have anything that will work for this engine. Thanks, DR

I am buying everything for my car twice it seems. I have the Eddy 4V intake I want and of course I bought an appropriate Holly carburator with tuning kit to go with everything. Now I think I want to go back closer to stock. I see the Carter AFB for my engine is a #4295S 4V. If any of you have...

I have the Mopar performance black crinkle valve covers & air cleaner bought new and still in boxes. Bought "old school" M/T valve covers for refurbishment & install now I want an "old school" air cleaner to go with the valve covers. Brand or condition don,t matter, Just want a 4V air cleaner...

I need a set of repop or salvage backup light bezels for my 67 notch. I would also like a good set of taillight housings as mine are not even driver quality. I guess I could beadblast the backup light bezels & paint them but would rather have new. Thanks, DR

I want to buy an AM/FM radio that will fit a 1967 Barracuda. (not thumbwheel). I understand there are some salvage yards to look and some years may interchange. Any part #'s and help appreciated! DR:salute:

I need a couple of 15" Ralley trim rings in driver condition. Anyone????????????? DR:profilel:

I am looking for a set of HP 273 exhaust manifolds for my 67 Barracuda. I think casting #2475769 Right and #2465847 should be them but if anyone has a set let me know and we can talk. Thanks, Douglas:read2:

Well I have been having some luck in the marketplace so I thought I would try this one again. I need 2 EA LBP Ralley centers only for a couple wheels I bought to fit my 8 1/4 locker that had the rings but not the centers. Let me know, I am ready to buy---------------- TIA, Rat:profilel:

OK, I spent the time doing due dilligence on the brake forum about the disc conversion thing. I am putting 70 Duster KH discs on my Barracuda and I really want a factory combination valve to replace the existing drum/drum divider block. I am using a 71 Duster disc/drum MC and have run my own...

Still looking for stock front sway bar for 67/72 A-Body. Must be one out there somewhere on a parts car or something. DR:-D

I need two sets of rings & centers for 15" LBP Rally wheels. The centers with the flat center will match what I have now. Thanks for looking, DR

Just bought a 8 1/4 A-body SG rear end and found out (from you all) I need the shock mounts and u-bolts to go with it. Anyone????? Thanks, DR

A-body 8 1/4 or 8 3/4 rear end, open or SG ok. Looking for a complete set of Rally wheels w/rings & centers. Prefer 15" but will buy 14" LBP or SBP ok. Edelbrock performer intake for 273. Carter 625 with mopar air cleaner. I think that covers it for now. Send PM if you have available...

have to replace vinyl top & headliner so I need either 68 front & rear glass trim complete or go with the original gaskets and aftermarket lockstrip. I need the inside rear view mirror as mine is there but the glass is broken. My gauge cluster, particularly the amp gauge is in need of...