Search results for query: *

Holley 650cfm double pumper carb. List 4777-7 with manual choke. I went through it with new gaskets and such. Has a new secondary bowl since the original one had stripped inlet threads. I just pulled it from my motor, but will probably need to be tuned for your needs. I decided to go a different...

750 holley double pumper shiny aluminum carb. It has about 1 hour of run time on it. I bought it for my 348 Chevy, it it was too much for it and the car didn't respond well to it. Swapped to a 650 and regained my drivability. It is new and you can see it looks it as well. Still to the factory...

Open 2.71 gearset for 8-1/4 rear. Came out of an old Dart I had. Will clean up nice. Does not have the cross pin bolt, but the pin is there. Asking $50.00 shipped to a US postal address

New aluminum metering blocks for Holley 750 double pumper carb. They have 4 corner metering and power valves in each block. Asking $110.00 shipped priority to a US postal address

Every item pictured is $10.00 sizes of pullies and fan spacers are on each one. Small u-joint 904 yoke. Tag light I think from a 70 E-body. 727 mount and tailshaft seal. You want all of it, maybe we can work out something.

Pair of aluminum metering blocks for Holley 750 dp. Has 4 corner idle and power valve provisions. I was going to Johnny Cash a carb, but broke down and bought a shiny new one instead. Asking $120.00 shipped to a US postal address

Holley 750 vacuum secondary carb. I put a kit in it, new plastic floats, needle and seats, fuel fittings, adjuster screws etc... Does not have a choke on it. I have not run it since putting a kit in it. I bought a 750 dp to take its place. Asking $125.00 shipped to a US postal address

3 piece kickdown linkage set. Dont know what trans/year. 2bbl set that is easily made to work on 4bbl. I will include the extra upper bell crank. Asking $130.00 shipped to a US postal address

Holley 2280 2bbl carb off of my ramcharger from when I swapped engines in 2020. Worked fine then. Has 144,000 miles on it. Asking $35.00 shipped to a US postal address

3 small block distributors. One on the left is a good 318 points distributor. Other 2 are electronic and should be considered for a core, parts, or rebuild. Asking $50.00 shipped for them all

Fairly new Holley 80555-1 650 spreadbore. Pulled from my Ramcharger a fee weeks ago for a 390cfm. This carb was purchased September of last year after my Edelbrock kept failing emissions. Put this on and passed. Has electric choke, vacuum secondary and emission ports. I pulled the front bowl off...

New Mopar Performance M1 magnum intake manifold. It is the dual plane, 4bbl version. Part numbers can be seen in the pictures. Has not been bolted on and will come with MP gaskets and bolt set. Asking $600.00 plus shipping charges

Holley 50cc accelerator pump kit. New and appears to be all there. Asking $60.00 shipped to a US postal address

Small block 3 piece kick down linkage set. Was for a 2bbl, but can be easily modified for a 4bbl. Asking $135.00 plus shipping charges

Used 3/8 oil or transmission cooler. I have no use for. Asking $25.00 plus shipping

I have new brake line set and wire harness clip set that's unopened and a partial 3/8 fuel line set. Asking $23.00 shipped

Brand new small block, Chinese airgap intake. Never installed. Asking $130.00 plus shipping charges

I have a Holley 700 double pumper carb. I went through it for my car and bolted it on. I couldn't get my linkage and drop base aircleaner to work with it. I wasn't about to buy another one. Changed directions and put a 3310 on it instead. It is ready to use. Bolt on and go. Has new PV, gaskets...

4 hole, pheolnic carb spacer. 1" thick. Asking $36.00 shipped to a US postal address

Magnum intake manifold. Was going to use it for my 97 Ram's spare engine, but will now not use it. Asking $50.00 plus shipping charges

Vintage Sun oil pressure gauge and cup. Asking $50.00 shipped to a US postal address

Everything in the pictures is $15.00 each except for the strut rods, and fender struts since they are a pair. The trans dipstick tubes the center does not have the stick but the others do. The trans yokes are 904. Fan spacers has the sizes on then. Pullies the same. The steering stabilizer was...

Edelbrock 1902, 750 cfm Quadrajet carb. Looks new inside and out. Some screws has some surface rust from sitting, but will not effect it any. Bought for my Ramcharger but I can't get the choke mechanism to work for me. (Operated opposite of Mopar) Asking $300.00 shipped to a US postal address

2-1/2" flowmaster clones. New never used. Came in an exhaust kit I got. I don't like the sound of them and went with magnaflows instead. The dimensions are on the boxes Asking $70.00 plus shipping charges

Holley 650 vacuum secondary, electric choke carb. It is very clean on the inside. I replaced the power valves, accelerator pump and some gaskets on it. Should be ready to bolt on and go. I was going to use it for my Ramcharger. Just changed my mind about changing carbs on it. Asking $160.00...

3 different transmission dipstick and tubes. One has no stick. Dont know what they fit. Tape is for reference. Asking $20.00each plus shipping

trans bracket Asking $15.00 shipped to a US postal address

New 727 trans mount and tail shaft seal. Asking $25.00 shipped to a US postal address

Factory single and 3 nipple breathers. Asking $20.00 each plus shipping

904 trans yokes. Asking $25.00 plus shipping for each one.