Search results for query: *

I have some extra parts to move! Four small block inspection covers-both styles. All 727. $10 plus shipping. Please specify which style you want. Two big block inspection covers. $10 each plus shipping. Two flex plate -one of each style. No cracks that I can find $10 plus shipping...

Free to good home-you pay the shipping! Small register center caps. Appear to be new but the chrome isn’t the best. Two 70’s Dodge truck wiper motors. Both bench tested OK. PM if interested.

I have for sale a Hurst shift lever and matching T-handle. Lever is a 7236 and fits the bolt on/through style of shifters. T handle is a bit discolored as seen in the pictures. Asking $50 OBO plus shipping. PM me if interested. Thanks FABO!

I have three shift operating levers that I’d like to sell. The ‘064’ one is for 76-up Truck OD tranny 1-2. The ‘368’ one is for 70-74 E body and 71-74 B body REVERSE. The ‘D’ one is 64-74 A body 3-4 lever. Asking $16 each including shipping.

Have a pair of A833OD shifter rods that appear to be from a truck, based on the attached internet pictures from Brewers. Asking $30 plus the ride. PM me if interested.

I have a 1966 383 and a 1978 400 motor that need a new home. I’ve been saving them for a BB truck project that will probably never materialize. Both rotate freely and have been in my dry garage for 15-20 years. The 383 came out of a C body and the 400 is out of a Cordoba. Asking $250 each...

I’ve got a 1966 383 for sale. Came out of a 1966 Newport and had been in my dry garage for 15 years or so. Motor turns over easily with a ratchet on the crank pulley. It’s a 2 barrel motor. Consider it to be a core. $350 OBO. Pickup in West Michigan. Not gonna ship this but will help...

I have a new unopened MOPAR Performance Big Block Windage Tray for sale. Have had this in my garage for 10-15 years and don’t see myself using it any time soon. Asking $50 plus shipping. PM me if interested.

I have a pair of RPC fabricated valve covers for sale. They are for an LA small block. They are new in the box but were installed on motor prior to me getting them in a parts lot I bought. Some slight handling scratches and a couple of the small flat washers are missing. $75 plus shipping...

I have for sale a pretty clean Torker 340 intake. Came off a running 340 going in my 70 Duster. Doesn’t appear to have been ported and threads seem to be good. Asking $120 plus shipping OBO. PM me if interested.

I’ve got some throttle cable brackets for sale. I believe #1 & #2 are from big block trucks (but don’t quote me on that!) but they are big block. #3-#5 are big block brackets. #6 & #7 are LA small block. Asking $35 each plus shipping for #’s 1 & 2 and $25 each plus shipping for #’s 3-7...

I have a 1974 440 short block. It is disassembled and has been in dry storage in my garage for probably 15-20 years. It was acquired with no heads or intake manifold so the bores have some surface rust, but not pitted. Standard bore. Cast crank is std/std, as well. Could use a good...

I’ve got three good sets of LA OEM head bolts for sale. Threads are good. Need a good cleaning. $25 shipped per set in USPS Small Flat Rate Box. PM me if interested and let me know which set you want: 1,2, or 3. SET 3 SOLD SET 2 SOLD Thanks FABO and thanks for looking.

I’ve got a Holley list number R-7887 2 barrel carb for sale. Came off a running 318 a few years back. It’s been on the shelf for awhile. Everything moves freely, but I’m sure it could use a rebuild. $30 OBO plus the ride. Located in West Michigan. Thanks for looking!

I have for sale a brand new in the box Edelbrock 750 cfm carburetor with manual choke. I bought this a couple years back to use on a 440 project I had going but ended up swapping the 440 for a 340 for my Duster project. It appears that it was originally bought through NAPA based on the Balkamp...

I have a pair of RPC LA small block aluminum valve covers. They are new but were once installed on a motor and never ran. I got them as part of a parts deal and don’t have a use for them. The bolts, Teflon washers, and lock washers are all present but a few of the flat metal washers are...

I have a 1972 340 block for sale. Block is 0.060” over and has some grooves in two cylinders as seen in the pictures. Based on the fact there is no groove at the top of the cylinders and everything else in the motor appeared to be nearly new, I’m thinking it was rebuilt and something was...

Silvolite 1267 .060 over pistons. Will donate for the price of shipping if someone can use all or some. Also looking for hinge for 1975 glove box door.

i have a set of used Silvolite 1267 pistons for sale. They are .060” over and came out of a short block I acquired years ago. One piston has some damage on the top as shown in the pictures. Asking $50 OBO for them, as I’m not really sure what they are worth. If I’m out of line price wise...

I bough a set of Schumacher Tri Y small block A body headers a few months back for my 1970 Duster 340 4 speed project. After doing some research, I found that these don't work well for a 4 speed application, so I am going to pass them on to someone that can make use of them. These headers were...

ive got a couple trunk floor pieces I would like to move on if someone can use them. These are from a 73 dart trunk floor and fill the spot between the frame rails and the closeout panel between the quarter panel and the trunk floor. Surface rust only. Very nice metal. Asking $10 each plus...

I have a really nice pair of powdercoated A body torsion bars for sale - part numbers 892/893. These are the 0.870" diameter bars for 340 cars. I bought these "as is" from another FABO member to use on a 1970 Duster project I'm working on but have decided to go in a different direction now...

I've got the following front suspension parts off a 1963 Dodge 330/ B body that I need to get rid of. Car had drum brakes on the front. I don't have a use for them so I am listing them here. Shipping is from West Michigan. Lower control arms - good shape with pivot arms - one is pretty...

Hi FABO! I know this isn't the truck forum but knowing how many of us have multiple interests, I thought I would post these here as well! I bought these from Bouchillon Performance probably close to 8 years ago for a truck project that never quite got to the point that I wanted to finish it...

Hi guys! I live in Michigan and I've got a set of clean MT valve covers for a small block that I will not be using. They are very clean. One has had an aluminum tube welded on to be used for a filler tube (?) and one of the breather spots partially machined out. The other one is untouched...