Search results for query: *

I'm hoping to be able to spray undercoating on my 68 this weekend since it looks like it's going to be the last good weekend before winter. I need to get the splash shields in place before I start masking off the body. I took this car apart in 2013 so I'm a little fizzy on some things. I seem...

My original side markers are completely burried and would take a long time to dig out so I'm asking here... The reproduction side markers come assembled with the lens inserted into the housing first, then the gasket and finally the back half of the housing is screwed on. Is this correct? In...

Who here has used the door handle and mirror reinforcement plates from Dynamic Renovations? The instructions for the mirror reinforcement plates don't call for any urethane between the plate and the body. You just put the plate up against the inner door and bolt the mirror down. A few days...

My hood hinges are very loud. There is a lot of popping and banging when you open and close the hood. They looked completely dry so I lubed everything I could see last night. First I sprayed everything down with spray white grease. That didn't seem to do much. Then I sprayed everything with...

So, my 68 Dart has factory undercoating inside the doors.(on the inside of the outer skin) There are no impact beams or anything inside the doors...they are just a hollow shell. Did the factory add an impact beam inside the doors at some point? What year? If/when an impact beam was added...

I looked at the 69 service manual but it didn't say anything about removing just the wing window glass/chrome pivot piece. Can the wing window glass and chrome pivot piece be removed and installed with the rest of the frame installed in the door? Or does it have to be installed into the door...

Not sure where to put this question... Looking back at my disassembly pictures and I can't figure out these clips. Does anyone have a better picture of them? There is one on both sides...one for the fuel line and one for the brake line. The picture looks like it's built onto the seat...

Just got my 68 Dart back from the body shop. It looks like they welded up the washer bottle holes on the inner fender. There were some extra holes I wanted welded up but it looks like they welded them all. Can I get a measurement from some 68 Dart owners? A measurment from the firewall to...

Looking for advice on a paint formula for 1968 QQ1 blue. The Dart is ready for paint but the body shop hasn't been able to find the right color. Everything they've tried is too light and looks like B5.(I have not seen it in person...just going by what I'm told at this point) A sprayout was done...

68 Dart GT original 318 car. I think there are some extra holes on the DS inner fender. I've been looking at pictures online and I don't see A-bodies with holes in these locations. They look like factory holes but a lot can be changed in 52 years. Just looking for confirmation that these...

Can anyone confirm that the 68 Dart parking light housings were originally zilver zinc plated? That's what it looks like after cleaning up one of the housings. Has anyone had these replated without removing the socket from the housing. I really hate tearing apart something that functions...

My 68 Dart only has a DS mirror. I'd like to add one to the PS. First of all, does the factory PS mirror mount the same way as the DS?(one stud and one screw) Second, do the hole locations mirror the DS? If not, can I get the dimensions for the correct hole placement?