Search results for query: *

I got my 727 apart...how do I take the Rear band off so I get get to the servo and replace the spring with the one in the TF-2 kit? I backed it out all the way but don't see how it is attached. Thanks. The trans is in the car, by the way. -Alex

Just got a TF-2 transgo shift kit for my 727 and I have a question. After reading through the instructions, they make it seem that some mods should only be done on race only vehicles. My car is a street/strip car. Exactly how hard do the shifts become? Any feedback from those of you who have...

I re-read my Mopar mags once in a while and found an article from the February 2002 issue of Mopar Muscle on reprogramming the 727. It mentions drilling one hole in the separator plate to 3/16" and three other holes to 1/8". That's no big deal but my question is this: If I do this now, will...

Did all 8 1/4" rears have threaded adjusters to adjust backlash? I thought they were adjusted using shims. I got my 8 1/4" out of a 73 Dart if it matters. I was planning on sending it out to put the new gears in because I thought it was the shim type and I didn't want to deal with it but if it...

I'm going to change the fuild in my 8 1/4" open diff. Do I use the gasket or just some RTV? If I just use RTV, which is better to use? Also, what are the torque specs for the bolts and drain plug? Will they be different between using the gasket or RTV? ......so yeah, just help out with as...

Does anybody know the length of the dipstick and dipstick tube on a mid 70's 727 transmission? I'm trying to make sure it's got enough but the reading seems like it has way too much. I know it went down when I changed the trans lines 2 days ago. Now I'm wondering if the dipstick is the...

I have a 727 with 2800 stall converter behind my 318 w/ 360 heads(soon to be replced with a 360). I am planning on installing a trans cooler. I probably should have done this when I got the converter, I know, but I'm finally getting around to it. I work at AutoZone and we have the Hayden...