Search results for query: *

Hello, One of the AL Blocks I bought did not have the Rear Main Seal Retainer top Section. I just need the special Top AL Rear Seal Retainer, not the bolts or anything, and the bottom is the same as an Iron Block so I am set there. Thanks!

Hello Looking for a vintage FM Converter similar to this one: Part Must work however. I took a chance on one at a swap meet.. It does not work, so I am looking for another one. Thanks!

Hello, Looking for the Clip that Screws into the rear of the Master Cylinder and Retains the Piston in the bore. Prolly most any Single pot or Double Pot Cast Iron MC will do, from say '62-'76 With Drum Brakes or KH Calipers. The Ma MoPar Master cylinders I believe had an internal Retention...

Hello, Looking for an OE '62 Valiant Radio. Really anything from '62-'64 A bodies should work. I can swap the Buttons and Faceplates to my '62 valiant stuff. - it just needs to work on AM. Thanks!

Hello, I am looking for a Left splash shield for the the KH Disc brakes. Also looking for the OE Left handed threaded studs for the KH Disc Brakes as well. Thank you.

Hello everyone, I am looking for a good working/ sounding / beeping OE LO tone sparton horn for my '62 valiant. The car has factory dual horns.... but the lo tone does not beep. Thanks for your help. Can pickup at Carlisle.

Hello, Looking for a nice set of these: Pm or reply Here.. Thanks!

Here is what I am looking for: One that is Straight or close to being workable. Thanks!

Hello All, I am looking for a clean Drivers Side fender for a '62 Valiant. Please PM me here with what you may have, Thank you.

Looking for a set of "302" casting heads. Perferably within an hour or so of IRWIN PA. thanks, Greg

Hello All, I am looking for a Scrap / LA Points style Distributor. I specifically need the octagon rub block more than the whole dist, but If you have an entire one that is just in a pile that's fine too. Shipping would be to zip code 15642. Thank you for your help! Greg

Wanted... Nice / correct 64 a body park brake handle 20200608_194109 by Hyperpack, on Flickr 1 large body plug..2.5" 20200608_194032 by Hyperpack, on Flickr 63-66 Driver's side air box that has functioning hinge and is not broken or rusted. 20200608_194126 by Hyperpack, on Flickr Pm me here...

Hello Guys, I am looking for a Slant 6 oil Pan for a 63-66 A body - If you have the Pick up too that would be nice, but not required. Pan is the main part I need. Please add shipping to 15642. PM Me Here. Thanks for your time! Greg

Hello, i am in need of a black armrest pad for the drivers door on my 64 dart. I just need the pad, not the base, i dont need a set as the pass side is great, otherwise i would buy a set new, Pm me here. Shipping to 15642, pa. Thanks! Greg

Hello, I am in Need of the Vent Window Swivel - for a 64 Dart ( I would think 63-66 are all the same) - Not sure of Barracudas. For a 64 Hard top - Not 4 door or valiant. - Its the Swivel Part that Sticks Down into the Door Frame inside the Vent window Frame - Mine is Broken. It's Die cast...

Hello, I am looking for a gauge cluster for a 64 dart. It needs to have a working speedo, Temp and fuel gauge. Thanks for your time. Pm me here. Greg

Hello, I am looking for a Wiper Switch with the Washer Button in the center. I believe my car has Variable Speed Wipers. Other Models and years May fit. PM Me here with any leads. Also Shipping would be to 15642. Thanks, Greg

Hello, #1 I am looking for an inside door opening mechanism for a 64 dart 2 door. (Found and Bought) - Thanks Lee - Still Looking for Items #2 and 3 Below. #2 Looking for an intact Temperature Cable for a 64 Dart. #3 Looking for a Drivers Side Vent / Fresh air Box with operating Metal...

I am Looking for a Passenger Side 318 Manifold with a Operating Heat Riser valve; Can Be from a Truck or a car. Must have Ribs in the Casting, Should be a 76-89 Piece. No vacuum Opererated heat Risers.. Just Thermotastic Spring type. Send Me a PM if you have one. Thanks, Greg