Search results for query: *

Does it matter which way the camber bolts face? Should the nut side be out or in or does matter?

Do I just tighten this up? Or so I need a new arm? It's a new. I noticed the noise when I pulled into the garage and had my son rock the steering wheel back and forth. Yikes!

My PST 16:1 box was warrantied for excessive play at the pitman arm. Turns out there was a bearing missing. I am got the new one today, but wondering what the best way to replace it is. I want to be sure I install the box straight on. My plan was to leave the pitman arm attached to the center...

I just got my car on the road and there is an excessive amount of play in the steering wheel. I finally was able to get a helper and with the wheels off the ground, had him rock the steering wheel back and forth, while I checked for play. I immediately found it out of the box...

Has anyone replaced the dust boot on the moog K704 upper ball joint? I can't find anything online besides aftermarket, ones, but not sure on which. I emailed moog, but waiting on a response. Thanks.

I finally got around to installing my box and column and the darn thing won't turn lock to lock. It's like it gets stuck (either direction). It only rotates a quarter turn. I thought something was hitting, so I removed everything but the center link and nothing changed. I also removed the...

I ran across this video series. Now it is for an E body, but it is 99% the same as A body. There is a lot of information, especially about the restoration process, but he is very detailed on how to disassemble and reassemble.

I just called to order one if these and they are out of stock! Lead time at least a month. This is, really slows down progress.

I am starting to put together my front end and I am wondering if these bars are in correctly. I realize they can go in more than one way. I installed both bars with the R and L in the bottom. Here are a fee pics, the control arms and the strut rods are finger tight. Wow, the car is dusty...

I tried to install my new Espo leaf springs tonight, but couldn't get the center pin in the spring to seat into the spring perch on my 8 3/4 axle. It looks like the spring pin is just barely too big for the perch hole. Can I enlarge the pin home or am I doing something wrong?

Hello, where is everyone getting their gaskets? I tried Detroit Muscle, but he only has the firewall gasket. I know there is the firewall gasket and a rubber gasket goes in between the two firewall plates. I think that is it, right?

I am tearing my manual column down to clean and paint, but I can't figure out how this piece comes off. Any suggestions? I have removed the shaft and outer tube already. That piece circled in red seems to be what is hanging up. Also, I got the rebuild kit for the coupler, but now am wondering...

Well... here is my dilhema. The interior of my dart is finished, and by finished I mean the floor was painted, sound deadening, jute and carpet all laid. It has been done for a few years while I work on the body. My dad suggested that since I was prepping the undercarriage for paint, I should...

I am gathering a list of parts in preparation of finishing my suspension. Car is a 70 Dart Swinger 340 auto with sbp 14" Rallys. The front suspension has been rebuilt with a rubber master kit, using the offset moog bushings in the control arms. I am planning on purchasing the PST 1.03 bars and...

Hi everyone, I am wondering if someone near me has this socket, they would be willing to let me borrow. I know you can by them, but my 70 Dart is the only Mopar I have, so I can't see buying one. If you have one that you'd be willing to let me borrow, shoot me a PM. Thanks everyone!

I am getting together a parts list for my front suspension rebuild, which I am hoping will happen this winter. Can you take a look at my list and make sure I didn't miss anything? All Moog Part numbers. Upper ball joint x2 Lower ball joint x2 upper control arm bushings Strut rod...

I am getting a list going for the front suspension upgrades and was wondering if the PST 1.03 bars would be too harsh for my 70 dart 340 (now with /6 w/o AC bars). Car is street driven only.

70 Dart 340, manual steer, auto on the column. I took the column out to paint it and redo the dash. Everything is going back together well, except the steering column. I got it put back in and hand tightened the the three nuts that hold it to the dash. I have not installed the bolts to the...

Hi everyone. I have a 70 dart 340, and need to replace the front and rear leaf spring bushings. I'm not sure where the best place to get these. I did a search and it seems that rock auto etc, have the incorrect ones? I would like them in rubber. These are factory springs. Thanks!