Search results for query: 66 barracuda

I have them, but not sure where they are supposed to go on my 64 Barracuda. Does anybody have any reference pics? https://www.detroitmuscletechnologies.com/mopar-63-66-a-body-and-62-65-b-body-frame-torsion-bar-splash-shields/

New member here . I’m looking for a rear bumper and deck lid for a 66 Barracuda I’m located in the Houston area

I know you asked about 66, but my 65 Barracuda was built in St. Louis.

66 Barracuda Looking for plastic interior rear window trim af bottom of window and the body. Two pieces of trim were the top of the window and body near the two interior lights. Also two plastic covers on the wheel well on the chrome latches for the folding rear seat.

THATS A FACT i CAN'T WAIT TO GET MY 66 BARRACUDA ON THE ROAD

Is it just me or do the 3D printed lenses look a little odd? The '66 Valiant lenses look Ok but the ones further down don't.

...The first generation Barracuda did not enjoy the instant popularity that the GTO and Mustang did. Don't get me wrong, I like the 64-66 Barracudas, but facts are facts. Over the past 30-40 years, the 64-66 Barracudas have not enjoyed the popularity and parts support the 64-66 Mustangs did. Or...

The '65 has cable linkage, the '66 has mechanical linkage. Two completely different transmissions and linkages, not much of anything interchanges that will be of use to you. Best bet for you would be to get a '66 steering column and shift linkage and swap that in, or an aftermarket floor...

I have a 1966 V8 barracuda factory air condition floor board Rusty seats are in the car tracks are missing the clusters missing factory V8 factory air condition car door fenders Hood grill and Deck lid decent car has been sittlng for a few years Chrome's pretty decent on my car in Crossville...

Hey FABO. I’m looking for a set of 1964-1965 Barracuda/ I’ve read that 66 is different because of the coffin center console… (maybe other A-bodies might work? Valiant?) bucket seat bracket slider bottoms, this would be the piece that attaches to the floor pan connecting to the seat bracket...

From a 66 Barracuda, in good shape. Fits manual steering only, great way to convert your power steering car. $75 or $100 shipped from 95695 Woodland CA

I have one (1) factory auxiliary harness to add a fender mounted turn signal. I believe this was for a 66 Barracuda but might work with other years. Do your homework to verify this will work with your vehicle and fender mounted turn signal. $25 including shipping to any US zip code; elsewhere...

I have a 66 Barracuda AC dash in my 65 Dart wagon. Those 2 bolts are the only fasteners that hold the 65/66 vent in place. I can get the distance between the 2 bolts but likely will be several days before I can do it

Seems like Miguel is out of business in Mexico for these. I believe Layson's is now importing the Mexican lenses directly since their Australian connection has been broken since Covid. Also Classic is now stocking Layson's parts for the 66 now too...

Searching for a nice clean driver side lower rocker molding for a 65 barracuda approx 6 feet long . 65 valiant may also be the same, not sure . 66 barracuda is different though . can be shipped in pcv tubing or card board tubing. let me know what you have , I'm in milwaukee wi.

Location: Franklin, CT Up for sale is a 64-66 Barracuda trunk lock cover. Always broken or missing. This one was red but has tan underneath as I believe they were painted per car. It has two small blemishes on the corners in the back (very hard to show in photo)and a small crack near the...

Your Cuda is a sweet ride Pete.

Read the ad again, 66-67 difference is the letter "M" prong location.

First time pulling the instrument panel on my 66 Barracuda I failed to disconnect the battery. As I'm pulling the instrument panel, the back of the ignition switch touches the dash, I hear a quick arc --- there went the fusible link. I replaced the fusible link with an inline weatherproof...

416 in my 66 Barracuda

That color red works well with the vinyl top. That "Boston Creme", not so much. :)

The 65 buckets I have do have the floor brackets but don’t anticipate separating them from the seats. I will comment that the floor brackets on my passenger 66 Barracuda seat I have in my wagon as well as some from my 67 Charger buckets look to be identical to those for the 65.

My 66 Barracuda had a 65 trans, a 64 reverse manual valve body, and a push button shifter in a homemade console between the bucket seats. That was a lot easier shifting than reaching up to the dash with my left hand.

Agreed, but, many people have used the 1073 in that socket (along with other models like my '66 Barracuda lower taillight) and had lens melting issues. My point was, if you can't find the 1095 bulb, don't just plug a 1073 in it's place. Use something shorter and/or less candlepower/wattage until...

sorry i should've couched that more as: somewhat stock appearing as in not a motor plate and J bars with no fender wells

My 66 Plymouth I call Victoria, get very very close, updats done , front wheel disk brakes, front sway bar, 360 350hp, 904 heavey stack out of a ramcharger, 8 1/4 sure grip 2.87 gears, 66 Barracuda bucket seats... should be doing more then driving it up and down my driveway soon

I’m looking for a front hub assembly for a 66 Barracuda, snap. I took my car to a guy I’ve known for a long time for an alignment. Long story short, they put the wrong lug nuts on the ps wheel and spun the studs in the hub . Thanks in advance

I have a new one in box 250 plus shipping

On my 66 barracuda, there are two small holes next to the hinges on the trunk lid. On one of mine it appears there is a small rubber bumper. My trunk lid rattles and only has the one bumper left. Anyone know if any company offers reproductions?

Hi guys, whilst the cost is incredible (considering my conversion rate against the US dollar ), I was just wondering if the reproduction dash pads for 64-66 Barracudas are any good ? Peter