Search results for query: *

Has anyone used these with the nylon spacers?

I have a 85 D150 with the original 2 barrel 318. Would my engine have hyd or roller lifters. I ask because i think the factory changed to roller in 85 Thanks

This is a pre magnum 318 hydralic flat tappet cam. The engine hasn't been started for 12-18 months but ran fine before. I just got it going again, has excellent oil pressure but has a noisy lifter or 2. Can i expect the ticking to go away if i keep running it or should i be doing something ...

Just trying to get an idea where we might be at. I have a 71 360 30 thou over with very low milage, wiend stealth dp manifold, j heads with 2.02 valves, cr9.5, cam lift @50 in464= ex 436, dur @50 on the cam card says in 212.6, ex 225.2 carb would be a holley 650 vac maybe 750 vac. Any...

Hi I'm finding trouble trying to source a spring to increase the pressure of my mellings standard pump.Melling say they don't do one but i've read a few posts that people say they've changed the spring in their pumps to increase the pressure. or are they using a different pump I have a HV pump...

408 30 thou over 650 speed demon vacuum sec, airgap dp edelbrocks cleaned up bowls ect no porting 11.1 cr racer brown flat tappet 501/480 lift 232 dur, roller rockers 1.6 in, 1.5 ex

Hi posting for a buddy.Wer'e not sure if you can exchange the mounts of the 318 onto the 360 for a straight swap. Think i read somewhere that one of the mounts has to be changed. Can anyone clear this up for us please