Search results for query: *

1966 Barracuda, horn button retainer screws and plastic sleeves. On the left of the picture.

16 inch fan minus the clutch

Looking for a 66 Early A woodgrain steering wheel. Cracks in the wheel of, that can be repaired. Looking for minimal to no pits and a good Plymouth cap. PM me if you have one.

Still looking for the 66 Valiant Signat trim.

Looking for the lower rocker trim pieces for a 1966 Plymouth Signant. Mainly need the pieces for the lower rear quarters.

Looking fo the two brackets that bolt on the the block and transmission on early small blocks. Had a pair and it seems to have been misplaced.

Looking for a cast iron 273 4 barrel intake with the part number ending in 771, 563, 583. can’t use any intake that’s been modified.

Looking for a set of 8 .040 pistons for a 273. Need good used pistons with good ring lands.

Looking for a small block windage tray with bolts.

Looking for early A body trunk body plugs especially the two rectangular plugs located on each side of the trunk.

Looking for the HiPo 273 Aircleaner. I was asleep at the wheel and missed out on one recently. Also, still looking for the driver side rear wheel opening trim for a 66 Valient. please PM me if you have either or both of these items.

Still looking for wheel opening trim for my 66 Valient. Specifically need the driver side rear piece. PM me if you can help

Looking for wheel opening trim for a 66 Valient Signet. Doesn’t have to be perfect. What do you have?

Still looking for lower control arms with the sway bar tabs for my 66 Valient

Looking for a timing cover with timing tab for a 66 273 I’m building.

Looking for decent A pillar trim FOR A 66 Valiant Signet with no cracks. Mesa, AZ

Looking for early A small block AC mount for the compressor HiPo 273 valve covers 273 4 barrel Aircleaner PM if available Thanks

Looking for the power harness that goes from the heater switch assembly to the non A/C heater box. 67-72 A bodies. Later years may work.

Looking for a pair of big bolt pattern A body spindles. I have the upper big ball joint control arm, just need the spindles.

Looking for a pair of decent headlight bezels for a 69 Valient.

Looking for seatbelt coreS. Must be free of deep rust and corrosion. Also need C series bolts. We’ll also take the later K series bolts. Webbing is not needed. PM me if you have some

Looking for some nice black arm rest backs for my 68 GTS. If they need paint that's ok, I can use them

Looking for a good Carter Competition Series 9636 carb. Good working order or a core. No junk like frozen throttle plates.

Thought I would give this a try. Looking for some ash’s trays for a 67-69 convertable.

I need 5 hood insulation clips for my 68 GTS. I am prepared to buy a set. PM me or email at [email protected]

Buddy of mine doing a rat rod pickup. He needs a running 318/360 and tranny. Looking for a motor in a car he can test drive. Doesn't matter what car.

Looking for 68-69 factory cast iron manifolds for a 68 Dart GTS with a bigblock. Numbers are 2863900 or the 67 2899002

Looking for a rear seat for a 63 Valient or Dart convertible. Pm me if you have one you'll sell.

looking for a nice set of tail lights for a 72 Duster. Car is being restored

Looking for seatbelt bolts, Take as many as I can get. They need to have the hex head. PM me Need C1, C-10, C7, C509 (early C Body), C11, C12, C13