Search results for query: *

pns 4140063 and 4140442 (same part, different number) original factory MP viscous fan blade with steep pitch moves a lot of air I have a couple of these in very good condition I wont be using so time to make some room! $45 plus shipping paypal, moneyorder both work Thanks!:thumbsup:

Set of mounts for A body 318 and 273, 67-72. Blasted clean and primed, very good shape, includes bolts. $70 plus shipping (approx. $14 or less to U.S. addresses, others just ask) paypal, moneyorder both work

$25 each plus shipping (8-11 range for us addresses) bellcrank and cable clamp included paypal, money order thanks!

7.25 shock plates nice shape $25 plus shipping I've got one good U bolt to throw in, not pictured. paypal, money order Thanks FABO!:D

Drivers side heat stove and shield from a 68 318 Barracuda. nice shape, not beat up, just light flash and some dirt. $55 plus shiping paypal, money order Thanks FABO!

Auto or manual Nice clean piece, as pictured $40 + shipping paypal, money order thanks:D

full set with original bolts, $50 plus shipping should be under $16 to U.S. addresses paypal, money order Thanks!:D

Nice clean set of A body smallblock 318 engine mount brackets. Blasted and primed in excellent condition. $100 shipped to u.s. addresses (other addresses just ask!) paypal or moneyorder both work Thanks!:thumbsup: Gracias, FABO!:thumbsup:

Pulled from a 1970-ish 318 years ago and shelved. Very nice condition. Set of 8 with #3418645 rods. TRW L3013F 0.040" oversize. Pressed pin. Cast flat tops. Next builds are 360's so I wont need these. $150 plus shipping from Phoenix, Az. paypal, money order both work Thanks...

18-1/2" dia. offset 5 blade MOPAR fans in very good condition. part number 4140442 one with good "thermo trol" clutch (under 3-3/4" tall) $65 one without $50 (Hayden #2947 fan clutch is hd low profile used on bigblock A bodies) plus shipping from Phoenix, Az. paypal, money order both work...

Set of original covers pulled from a 68 Barracuda 318. Real nice shape, not dented and beat up, just dirty. Includes original bolts. $60 + shipping (approx. $23-$36 to US addresses) paypal, money order both work Gracias, FABO!:thumbsup:

...with banana groove shafts, spacers and hold down hardware, as pictured. Nice shape, shafts show very little wear, rocker tips look good. A good solvent type cleaning and I'd use them. I'd probably replace the adjusters with the ones with the lock nut. Personal preference. I have another set...

Stock pieces from a 318 probably a 1970 or so. Good shape, no issues. $34 shipped to US address. paypal moneyorder Gracias, FABO!:thumbsup:

Nice condition, gasket surfaces look flat. $30 for the clean one $15 for the dirty one plus shipping paypal, money order Gracias, FABO:thumbsup:

Set of stock big block rocker shaft retainers and bolts. 4 large, 6 small. $18 plus shipping paypal, moneyorder Gracias, FABO:thumbsup:

Adapter lets you use your RB distributor on a low deck bigblock. Includes adapter and correct distributor hold down with bolt. Nice heavy steel, looks like a factory piece. I removed it from a 361 out of a 74 D600. (o ring is shot, not sure if new one included will work) $50 plus shipping...

set of bigblock motor mounts for 66-72 B and E bodies. been on the shelf for a decade(or longer), excellent condition. rubber included, looks OK. $58.50 shipped to US addresses. paypal moneyorder Gracias, FABO:thumbsup:

late 70's 904 internals all looks in good shape Only part(s) missing: valve body assembly I want my crate back... so its time to go!:D Whaddya need... 1 piece or all... pm and make an offer... keep shipping cost in mind on the larger and heavy pieces... coming from Phoenix, Az. Gracias, FABO...

these are correct numbers for a 340 or 360. left side is narrower than the 318 piece that is sold incorrectly as 340/360 left. Rubber is good but cheap to replace if you feel the need. $50 + shipping from Phoenix, Az ($13.50 or less US addresses) paypal, money order Gracias, FABO!:thumbsup:

fits 340/360 in an A body 67-72 biscuit K frame Original set in great shape includes bolts and good rubber. Pulled from a 68 Barracuda w "fresh" 340. Been sitting the shelf a few years. Judging by how clean these are I dont think it ever ran much, if at all. $200 + shipping from Phoenix...

Bought years ago for a 440 build and not used. Feels good. Comes just as pictured. $70 plus shipping paypal or moneyorder Gracias, FABO :thumbsup:

Almost new/low mileage mopar distributor removed from a 361, if memory serves... Includes cap and wire set ...rotor is missing. Couldnt find any part numbers on body fits low deck bigblocks $60 plus shipping (prob around $16 or so to US addresses) paypal or moneyorder works Gracias, FABO...

A body smallblock exhaust manifolds. Real nice shape, no cracks I could find. Original bolts included (shown in pics) pulled from a 68 Barracuda w ps. Should fit most a body smallblocks. $110 plus shipping. Theyre heavy so its likely to not be real cheap. thanks FABO:thumbsup:

New in the box never used Northern 2 row aluminum radiator pn#20 9602 2.25" double row core 27" wide and 19-1/2" tall $200 new in '94. Northern Radiator 19" RACE PRO aluminum FORD-MOPAR radiator - 209602 $100 plus shipping in original packaging. Gracias FABO:thumbsup:

Factory 20" flex fan. Orig. from 74 up A,B,C and E both small and big block applications Nice piece, excellent shape, steep pitch will move a lot of air. $40 plus shipping from Phoenix Az. paypal, moneyorder Gracias FABO!:thankyou::thumbsup:

Nice older piece in great original condition(other than paint!). Doesnt even look to have been gasket matched. No more RB's in my plans so no reason to hang onto it. (I am keeping the SB one tho:D) $160 plus shipping from 85042 paypal, moneyorder Gracias FABO:thankyou::thumbsup:

MOPAR factory flex fan 20" diameter 5 blades pn# 3462190 $45 plus shipping (under $30 to u.s. addresses, other locations may vary) paypal , moneyorder Gracias FABO:thumbsup:

20" 5 blade fan for clutch type. Blades straight and in excellent condition. pn#4266059 $45 plus shipping from Phoenix Az. Paypal or moneyorder

mopar pn 4140063 fan aluminum blade fan diameter is just over 18" height just under 3.75" , clutch 7.5" dia. clutch feels good, firm but smooth rotation blades are nice, not at all beat up, original finish $50 plus shipping parts located on Phoenix, Az

Bought awhile back for a bigblock 518 od conversion. Plans changed, as they do. Never bolted up, only out of box twice. Once when it arrived and once for the pictures. Simple dealie....cut off your smallblock 518/727 bellhousing and this bolts on at the pump flange. Includes new bolts for bell...