Search results for query: *

I previously posted about electrical issues with my Barracuda I was chasing down. Since the bezel was out I checked the pins on the main connector. I found 3 loose pins and one broken off completely. I soldered a wire to the contact point on the board to that broken one with a slip on connector...

I've been having brake light issues (69 Barracuda) for quite a while. The brake lights were either dim or didn't work at all. I thought it was a short. So I just wired the switch to the battery feed at the fuse box instead. Since we had the dash apart and testing things we noticed the emergency...

Well I was having wiring issues and decided to take the bezel out for cleaning and bulb replacement. It was kind of a pain but my neighbour cleaned the guages and lenses after I took it out. He centered the gauges for more accurate readings as well. We will be testing the headlight switch...

I had an issue with my horn where the horn was always on. I had to unplug the horn in order for it to stop. I was thinking the horn button was shorted to ground keeping it on. Pushing the horn button we could hear the relay activating? Anyways we traced the horn hot wire to the bulkhead and...

Okay, so I finally got my replacement (Accel) vacuum advance mag pickup distributor. It's a Mopar replacement. I'm having problems again. It starts fine when cold. It idles/runs better than the old distributor. Every time I shut it off when its warm it doesn't want to restart. The reluctor gap...

So I got my new Accel distributor & MSD 6AL today. I got the Accel cuz Canadian prices are so high. The MSD was expensive. Anyways, I put it (distributor) in & cranked and cranked..no start. So I waited (thought I flooded the engine). So finally it started, and was running real good. So I...