Search results for query: *

  1. 71DodgeDemon340

    Easiest way to adjust the clutch with a scattershield

    whats the easiest way to check the clutch adjustment on a a-833 with a scattershield? Mine is at the top of the pedal but i believe it is too high, just want to make sure the clutch is fully engaging. Drives fine no slipping but not sure the easiest way to go about it since i cant get a feeler...
  2. 71DodgeDemon340

    Is the clutch pedal return spring and the over center spring the same thing?

    i just came across this in another thread, i had no idea you had to ditch the over center spring when using a diaphragm clutch. My question is, is the clutch pedal return spring and the over center spring the same thing? My spring that goes around the end of the clutch pedal is still in and i...
  3. 71DodgeDemon340

    Hot to check clutch disengagement measurement with blow proof bellhousing

    Has anyone found a good way to measure correctly with a blow proof bell housing? I know traditionally there is an inspection plate. I thought about taking a feeler gauge in the correct thickness and bending it and fastening it to a bendable wire or something to get in there. Also snyone know the...
  4. 71DodgeDemon340

    Hurst shifter box too much play?

    Hey guys for some reason i just happened to notice today that the shifter has some side to side play when in gear, the play seems to be coming from the shifter box and it seems worse in 2, 3 and 4. It is tighter in 1st but still has a little bit of play side to side. Any thoughts? This seem...
  5. 71DodgeDemon340

    Speedo gear seal installation

    Hey guys sorry for so many posts, but i got my parts from brewers and got the seals, my question is on the speedo adapter the little black seal goes open end first then the little c clip goes against it? Like this ?
  6. 71DodgeDemon340

    Speedometer cable leaking at pinion adapter?

    Hey guys i narrowed down my leak, im leaking gear oil between the speedometer cable and the pinion adapter, is there a seal between the cable and the pinion adapter or does the cable just seal on the threads of the pinion adapter.
  7. 71DodgeDemon340

    A833 speedometer pinion adapter question

    Hey everyone, just recently started to get a slow drip from my speedometer pinion adapter and between the adapter and fitting of the speedo cable. I believe im just going to replace both, the speedo cable isnt hard to find, found them on brewers, but the pinion adapter has got me puzzled, i know...
  8. 71DodgeDemon340

    Bumping out of 2nd

    Hey guys its not an all the time problem and not a big deal at that, My 833 shifts fine and all seems good but everyonce in a while when im going up a hill and then go back down and let off and let the engine slow the car sometimes the tranny will jump out of 2nd. Push clutch in and shift to...
  9. 71DodgeDemon340

    infamous 4 speed whine?

    hey guys ive heard of the infamous 4 speed whine. when exactly do you hear it. cause i cant hear it whine till i let off the gas lol.
Back
Top