Search results for query: *

  1. barracudadave67

    Distributor stand

    I redid a few electronic distributors, so I built a stand for them, so they don't lay around and get banged up. Black paint was all I had. Dave
  2. barracudadave67

    Dual pickup electronic distributor

    What years were these in use, and in what vehicle. I just dug one out of my stash. I didn't know they had such a thing. Its a Mopar distributor Dave
  3. barracudadave67

    Distributor ???

    Can any one tell me what the numbers on the SB vacuum advance canister arm mean. See attached pics. I'm rebuilding a couple of distributors, and am curios. These numbers are not visible when the distributor is assembled. I'm geussing they are something to do with vacuum. Dave
  4. barracudadave67

    SB distributor rebuild kits

    Any one know where I can obtain the internal bushings and washers that are inside a SB dizzy,??? I was redoing one today and the plastic busing on the bottom of the dizzy cracked off, when I was putting it back together. Use to be you could get them, but I've had no luck finding any. Thanks Dave
  5. barracudadave67

    Cleaning an Alternator

    What is the proper cleaning agent to use to clean a dissasembled alternator,???. can you clean the individual parts in a regular parts cleaner, with solvent, ???. I know you can use electronic spray cleaners. I was thinking of cleaning mine in the parts washer, then spray it off with electronic...
  6. barracudadave67

    66 barracuda gage replacement

    I am in the process of making a replacement gage bezel/and rear panel, to install 4 after market 2 inch gages in my 66 B-Cuda dash. 2 inch gages mount right into the plastic outer bezel with a little sanding in the O D of the gage holes. I will be able to use the rear metal gage support/panel...
  7. barracudadave67

    Double Bypass

    I finally got my new to me 66 B-Cuda to stay running, and not leave me stranded. I performed a double bypass on the bulkhead connector. I tried dissasembling all the connectors, and cleaning them, but it just wouldn't work. The problem contacts were the fusible link, battery to amp meter wire...
  8. barracudadave67

    Ignition just cuts out.

    Help i have been stranded twice. Cruising down the road at 2500 rpm, after car gets warm, when all of a sudden igignition just dies, then it is real hard to start, and sometimes it just cranks with no spark. When you do get it started it will only run a short time. When you try to start it and...
Back
Top