Search results for query: *

I am looking for one bushed W2 exhaust iron rocker arm. Can be new or good used part. Prefer one that has not been ground for valve spring clearance. PM me. Let me know what you have.

I am looking for a few Eagle small block H beam connecting rods in very good usable shape. PM me with what you have. Thank you

I am looking for a few Eagle small block H beam connecting rods in very good usable shape. PM me with what you have. Thank you

I seemed to have misplaced my pinion seal protector for my 489 case 8 3/4 center section. This is the circular piece that slides over the pinion yoke and covers the pinion seal area. Anyone have one I could buy? PM me with what you have. Thanks

A friend is looking for an aftermarket reverse pattern shifter with reverse lockout for his A body A727 equipped bracket car. He is looking for a complete kit with the shifter, cable and brackets for the trans. PM me with what you have.

I am looking for a 69 4 speed AVS carb model 4611S with a date code in the range of December 68 through Feb 69. These I believe would be stamped M8, A9 or B9 on the bottom front left. PM me with what you have. Thank you

I am looking for an aftermarket Ignition box with rev limiter in nice shape. It will be used for a street strip setup. PM me with what you have. thanks

I am looking for a complete 8 3/4 rear brake set up including the backing plates, e-brake cable lever, pad separator piece, ... for a LBP axle conversion. Will consider with our without the drums. Trying to help a friend complete his conversion in Texas. If 8 1/4 LBP 10" parts are the same...

I am looking for 8 of the stock 273 mechanical rocket arm adjusters. Misplaced Hal’s of mine when I took them apart to clean and inspect. Not sure if the slant six adjusters will work but I’d they do I would take those as well. I know I can by aftermarket replacement adjusters and lock nuts...

i am looking for a pair of 1973 to 1976 A body disc brake spindles and the sliding style disc brake caliper mounting brackets. These are for a friends ride in Indiana. Let me know what you have.

Looking for a nice 4611S Carter carb for my 69 340 4 speed project. Let me know what you have. Thanks

I am looking for a single plane aftermarket manifold for a 5.9 magnum build. Let me know what you have.

Looking for both the left and right side emergency brake levers for A body 10 x 1.75" drum brakes from an 8 3/4 A body rear. These is the parts that attaches to the brake pads and the emergency brake cable sluts into. 1969 to 1972 would be the years for the parts that I need.

I need 4 bushed iron rockers for the W2 race heads to complete my set. I need: 2 exhaust part # P4120202 (stamped with 3577074) 1 left intake part # P4120201 (stamped with 3577692) 1 right intake part # P4120200 (stamped with 6577691) PM me if you have any...

I need a nice distribution block (both if there are 2 pieces) for a 1969 4 way drum brake A Body. PM me with what you have.

Looking for a Carter 4611S 4 barrel carb from a 69 4 speed 340. PM me with what you have.

I am looking for an Indy 360-3 intake manifold with oval ports. PM me here with any availability or leads.

I am in need of a small block Lakewood or similar aftermarket bellhousing and block protector plate for my 4 speed project. Please PM me with details. Thanks

Looking for a pair of 8 3/4 housing ends to use on a shortened housing. PM me here. Thanks

I am looking for a new centerforce dual friction clutch disc for a 10.5" clutch system. PM me here. Thanks

Looking for a new or used 8 3/4 1350 steel pinion yoke and straps. PM me here. Thanks

I looking for the 2 side adjusters that screw into the sides of the 8 3/4 center section and their locking tabs and bolt. Thanks

Looking for a Milodon or Kevko oil pan and pickup. PM me with details.

Looking for a good used or new Milodon windage tray for small block. PM me with details.

Looking for a new Centerforce 10.5 inch dual friction clutch disc if anyone has one they do not need.

Looking for a new set of SCAT Pro Comp I beam rods or new SCAT or other brand HBeam rods. PM me with information.

Looking for a 360 main stud girdle kit. PM me if you have one you are willing to sell. Thanks

Looking for a set of SCAT I beam or aftermarket H-Beam rods for small block that are ready to run. PM me with details. Thank you

looking for a set of forged dished pistons to use in a 4.00 stroke build. PM me here with information.

looking for a cast or forged 4.0 stroke crank for a 360 that is ready to run. PM me here with details. Willing to consider full rotating assemblies (crank,pistons and rods).