Search results for query: *

I have one new 1.6 ratio Crane roller rocker arm in its original package. $30 plus shipping.

I have another new Racer Brown STX-21 solid flat tappet small block cam. I bought several of these for bracket racing. I am no longer racing so this cam is up for sale. Specs with 1.5 ratio rockers are 560" lift and 272 degrees of duration at 0.050" lift intake and exhaust. LSA is 105 degrees...

I have a used set of 3.23 gears for an 8 3/4 pumpkin with casting number ending in 489. They are clean and appear to be in good overall shape. Price is $75 plus shipping cost. I will ship internationally. PM me with questions.

I have a very nice used set of rocker arms for W2 and W5 heads. These are 1.5 ratio and have some light valve spring clearancing. This assembly has the optional 3rd oiling hole to spray pressurized oiling on the valve springs. These rockers were used for dyno time and a few quarter mile pulls...

I have a nice used Moroso 5" single groove aluminum crankshaft pulley. I believe the part number may be 64700 but I cannot recall. For use with standard damper (pre 1972) Requires 36 degree x 17/32 inch wide belt. This has an asymmetrical bolt pattern and can fit against other post 1972...

I have a new set of forged I beam connecting rods by Childs & Albert in the original box. American made in the 1990’s. Part number is 340-15B-2. Center to center length is 6.125”. Big end is for rod journals of 2.125” and small end is for pins of 0.927”. Weight per rod is ~ 685 grams. See spec...

I have a new SCAT forged rotating assembly for 360 & 5.9 Magnum Mopar engines. All parts are new high-quality parts. Final cubic inches will be 408”. The assembly includes the following parts. SCAT forged 4.000” crankshaft part # 4-360-4000-6123 SCAT forged H-beam connecting rods with APR...

New Racer Brown STX-21 solid flat tappet cam. I have had this on the shelf for a while. Was intended for a W2 bracket motor but plans have changed. Price is $225 shipped in the lower 48 states. Will ship internationally for the added cost. PM me with questions.

I have a new Camcraft solid flat tappet cam with the following specs using 1.5 ratio rocker arms: Intake Exhaust Lift 0.519 0.528 Duration @ 0.050 240 244 LSA of 109 degrees Price is $220 shipped in the lower 48 states. PM me with any questions.

I have a new SCAT forged rotating assembly for 360 and 5.9 magnum engines. All parts are new. The assembly includes the following parts. SCAT forged 4.000” 360/5.9 main crankshaft part # 4-360-4000-6123 SCAT forged H-beam connecting rods with APR 2000 bolts part # 2-360-6123-2124A Diamond...

I have several ignition parts for sale. Prices include shipping in the lower 48 states. I will ship internationally for the added cost. New MSD Digital 6AL ignition module part #6425 $290 shipped Used chrome ignition box $55 shipped Used coils. Jegs $35 shipped PM me with any questions.

I have a new set of 8 Mopar Performance pistons and wrist pins Mopar part# P4876973 for a 3.454” stroke crankshaft. Specs are 4.060” bore, 1/16, 1/16, 3/16 ring set, 0.984” wrist pin, flat top with ~ 5 cc eyebrows, listed by Mopar as 10.5 compression ratio. Compression height is ~ 1.72” per my...

I have two sets and 4 spare BBM used main cap sets for the 2.75" crank journal. See pictures below. $40 a set or $70 for the who lot shipped in the lower 48 states. I will ship elsewhere for the added shipping cost. PM me with any questions.

I have a new set of 16 new Erson big block Mopar roller lifters in their original box. These are 1.6 ratio and have needle roller bearings that ride on the rocker arm shaft. These rockers are USA made, and are very strong and are well constructed. These rockers use an 11/16” hardened shaft that...

I have 12 new Mopar Performance 1.5 ratio roller rocker arms for W2 econo heads. This set has the 8 exhaust rockers and 4 left intake rockers. Left intake part number is P4532859 and the Exhaust part number is P4532860.I do not have any right intake rockers. $520 shipped in the lower 48 states...

I have a set of New BRC 4.030" forged flat top pistons and pins for a 3.79" stroke small block crankshaft. Compression height is ~ 1.57" and the ring lands are 1/16, 1/16 and 3/16. 0.984 wrist pins included. Approximately 6cc valve reliefs. These pistons can be used in aftermarket race blocks...

I have 11 pairs (one complete engine set plus 3 spare pairs) of new Mopar Performance solid roller lifters for small block Mopar race blocks still in their packages. I took one pair to photograph. Part number is P5249584. See the included picture from the 1997 Mopar Performance catalogue for the...

I have 11 pairs (one complete engine set plus 3 spare pairs) of new Mopar Performance solid roller lifters for small block Mopar race blocks still in their packages. I took one pair to photograph. Part number is P5249584. See the included picture from the 1997 Mopar Performance catalogue for the...

I have a set of New BRC 4.030" forged flat top pistons and pins for a 3.79" stroke small block crankshaft. Compression height is ~ 1.57" and the ring lands are 1/16, 1/16 and 3/16. 0.984 wrist pins included. Approximately 6cc valve reliefs. These pistons can be used in aftermarket race...

I have 9 new Mopar single valve springs part number P5249838. Price is $45 shipped in the lower 48 states and will ship elsewhere for any added shipping cost.

I have 12 new Mopar Performance 1.5 ratio roller rocker arms for W2 econo heads. This set has the 8 exhaust rockers and 4 left intake rockers. Left intake part number is P4532859 and the Exhaust part number is P4532860.I do not have any right intake rockers. $520 shipped in the lower 48 states...

I have a new K&N 9” outside diameter (7.5” inside diameter) by 5” tall part# KNN-E-3650 & K&N 9# diameter extreme filter top part# KNN-66-0901. Both are new. Comes with a chrome ring at the bottom. One minor dents on the lit edge which you can see on the bottom right of the second picture...

I have two sets and 4 spare BBM used main cap sets for the 2.75" crank journal. See pictures below. $50 a set or $80 for the who lot shipped in the lower 48 states. I will ship elsewhere for the added shipping cost. PM me with any questions.

I have a new set of 16 new Erson big block Mopar roller lifters in their original box. These are 1.6 ratio and have needle roller bearings that ride on the rocker arm shaft. These rockers are USA made, and are very strong and are well constructed. These rockers use an 11/16” hardened shaft that...

I have a new set of TRW L2316 pistons and pins for a 0.030 overbored 340 engine. Specs are: bore 4.070” compression height ~ 1.81” piston pin 0.984” They have had some balancing done to equalize their weights but have not been run. They are a little dusty and have some minor shelf wear from...

I have a new set of 8 Mopar Performance pistons and wrist pins Mopar part# P4876973 for a 3.454” stroke crankshaft. Specs are 4.060” bore, 1/16, 1/16, 3/16 ring set, 0.984” wrist pin, flat top with ~ 5 cc eyebrows, listed by Mopar as 10.5 compression ratio. Compression height is ~ 1.72” per my...

I have a new CAT gear drive for small blocks. New in the box. Opened to take pictures. Clearing out a few excess parts I will not be using. Price is $230 shipped in the lower 48. I will ship internationally for the added cost. PM me with any questions.

I have used Eddy small block RPM dual plane manifold in great shape. All thread holes are fine. No pitting on mating surfaces including thermostat housing. No porting or modifications. $290 plus shipping. PM me with any questions. I have a couple nice used single plane intakes as well if...

I have several ignition parts for sale. Prices include shipping in the lower 48 states. I will ship internationally for the added cost. New MSD Digital 6AL ignition module part #6425 $300 shipped Used chrome ignition box $60 shipped Used coils. Jegs $35 shipped Pentronix coil is sold. Used...

I have a new full set (8 pairs) of Mopar Performance solid roller lifters for small block Mopar race blocks with 59 degree tappet angle that require a taller lifter. The Mopar part number is P5007399. Roller wheel is 0.81". These lifters are in their original packaging and look to be in...