Search results for query: *

I emailed Eric Weingartner about purchasing a small block Trick Flow intake, have him flow test it & do a video on it so the Mopar community will have the data. I'm about 30 mins away from Summit Racing in McDonough, Georgia so I could just run down & pick one up as it's in stock. He emailed me...

Why aren't regular snap rings used in place of spirolox retaining rings?

Any ideas what's causing this. The areas surrounding the intake are dry. Not from oil pressure switch, valve covers. I'm stumped. Can't see anything when the engine is running of course.

I want to raise my head cc's from 60 to 68 to use available pistons. I'm trying to avoid a 13cc dish in favor of a 5.5cc flat top to get the compression around 11.3-11.5. The dish is 1.450 compression height, the flat top is 1.465 compression height and matches my current 23.5cc dish piston. I...

Anyone ever order parts from CNC Motorsports? They have Scat I beam rods with ARP 8740 bolts, rated at 700hp for $419, ARP 2000 bolts rated at 800hp for $477. I plan to go with the 2000 bolts for the extra insurance. I believe in overkill.

Which measurement do I use when trying to match cam intake closing, cam intake centerline and compression. Wallace Racing Calculator shows cranking compression gauge readings +15 more psi for cranking pressure.

As cast Trick Flow 190 heads with a 2.05 valve. Aiming for 550hp. Opinions?

Can someone explain when to run a single pattern cam vs a dual pattern cam? How do they differ in power production?

An open chamber head with a flat top piston or a closed chamber head with a dish piston. Both at 10.5:1 compression.

Any one know anything about these heads? 2.08/1.60 valves, 185cc runners, 65cc chambers. Promax claims over 285cfm.

Summit scratch & dent has a bare Eddy head for $380. Comments?

Can flat top pistons be made with 10ccs and up?

Summitt has a set of demo small block Mopar 1.5 steel rockers for $380. Scratch & Dent sale. Retail for $750. Are they worth it?

I'm hoping some of you more experienced guys can give me some answers. Here's my combo: 414 stroker 850 Holley DP Eddy AG port matched, center divider modified Ported Mopar iron heads #P4876179 275@650 (advertised) 1.6 rockers Comp 242/[email protected] .558/.573 after lash Valve timing Open...